Download Table of Contents Print this page
Makita Angle Grinder Instruction Manual

Makita Angle Grinder Instruction Manual

100 mm (4”)/115 mm (4-1/2”)/125 mm (5”)

Advertisement

Angle Grinder
100 mm (4")
MODEL 9526NBH
115 mm (4-1/2")
MODEL 9527NB
125 mm (5")
MODEL 9528NB
I N S T R U C T I O N
WARNING:
For your personal safety, READ and UNDERSTAND before using.
SAVE THESE INSTRUCTIONS FOR FUTURE REFERENCE.
w w w . m a k i t a t o o l s . c o m
DOUBLE
INSULATION
M A N U A L

Advertisement

Table of Contents
loading

Summary of Contents for Makita Angle Grinder

  • Page 1 Angle Grinder 100 mm (4”) MODEL 9526NBH 115 mm (4-1/2”) MODEL 9527NB 125 mm (5”) MODEL 9528NB I N S T R U C T I O N WARNING: For your personal safety, READ and UNDERSTAND before using. SAVE THESE INSTRUCTIONS FOR FUTURE REFERENCE.
  • Page 2: Specifications

    SPECIFICATIONS Model No load speed (RPM) Overall length Net weight Spindle thread • Manufacturer reserves the right to change specifications without notice. • Specifications may differ from country to country. GENERAL SAFETY RULES (For All Tools) WARNING: Read and understand all instructions. Failure to follow all instructions listed below, may result in electric shock, fire and/or serious personal injury.
  • Page 3 5. Avoid body contact with grounded sur- faces such as pipes, radiators, ranges and refrigerators. There is an increased risk of electric shock if your body is grounded. 6. Do not expose power tools to rain or wet conditions. Water entering a power tool will increase the risk of electric shock.
  • Page 4: Specific Safety Rules

    Not More Than SPECIFIC SAFETY RULES DO NOT let comfort or familiarity with product (gained from repeated use) replace strict adherence to grinder safety rules. If you use this tool unsafely or incorrectly, you can suffer serious personal injury. 1. Always use proper guard with grinding wheel.
  • Page 5 Damage to these parts could result in wheel breakage. 9. NEVER use tool with wood cutting blades or other sawblades. Such blades when used on a grinder frequently kick and cause loss of control leading to personal injury. 10. Hold the tool firmly.
  • Page 6 FUNCTIONAL DESCRIPTION 001020 1. Shaft lock 001033 1. Slide switch ASSEMBLY 001051 CAUTION: • Always be sure that the tool is switched off and unplugged before adjusting or checking function on the tool. Shaft lock CAUTION: • Never actuate the shaft lock when the spindle is moving. The tool may be damaged.
  • Page 7: Inner Flange

    001654 9526NBH 1. Wheel guard 2. Bearing box 3. Screw 001655 9527NB, 9528NB 1. Wheel guard 2. Bearing box 3. Screw 001070 1. Lock nut 2. Depressed center grinding wheel/ Multi-disc 3. Inner flange 001082 1. Lock nut wrench 2. Shaft lock Installing or removing wheel guard CAUTION: •...
  • Page 8: Plastic Pad

    This can cause loss of control and kickback. • NEVER use tool with wood cutting blades and other sawblades. Such blades when used on a grinder frequently kick and cause loss of control leading to personal injury.
  • Page 9: Wire Wheel Brush

    15 degrees to the workpiece surface. During the break-in period with a new wheel, do not work the grinder in the B direction or it will cut into the workpiece. Once the edge of the wheel has been rounded off by use, the wheel may be worked in both A and B direction.
  • Page 10: Wheel Guard For Cut-Off Wheel

    001619 1. Lock nut 2. Abrasive cut-off wheel 3. Inner flange 4. Wheel guard for cut-off wheel MAINTENANCE 001160 1. Exhaust vent 2. Inhalation vent • ALWAYS use guard with wire wheel brushes, assuring diameter of wheel fits inside guard. Wheel can shatter during use and guard helps to reduce chances of personal injury.
  • Page 11 A cut-off wheel can also be used with an optional guard. If you decide to use your Makita grinder with approved accessories which you purchase from your Makita distributor or factory service center, be sure to obtain and use all necessary fasteners and guards as recommended in this manual.
  • Page 12: Table Of Contents

    9526NBH Inner flange 35 Lock n ut 10-35 Plastic pad Flex wheel Rubber pad 76 Sanding lock nut 10-30 Lock nut wrench 20 9527NB Grip 36 Wheel guard Inner flange 45 Depressed center grinding wheel/Multi-disc Lock nut 5/8-45 Rubber pad 100 Abrasive disc Sanding lock nut 5/8-48 Wire wheel brush...
  • Page 13 First-Class Postage Required Post Office will not deliver without proper postage. Makita U.S.A., Inc. 14930 Northam Street La Mirada, CA 90638-5753 Fold...
  • Page 14 Paste 3. How did you learn about this product: Magazine From Dealer Newspaper Store Display Catalog 4. Most favored points are: Design Features Size Price Makita Brand MODEL NO. YEAR SERIAL NO. PHONE 20-29 30-39 40-49 Paste Paste Radio Exhibition...
  • Page 15 Date Purchased When you need service: Send complete tool (prepaid) to one Dealer’s Name & Address of the Makita Factory Service Centers listed, or to an Authorized Makita Service Center. Be sure to attach a letter to the outside of Model No.
  • Page 16: Warranty Policy

    MAKITA LIMITED ONE YEAR WARRANTY Warranty Policy Every Makita tool is thoroughly inspected and tested before leaving the factory. It is warranted to be free of defects from workmanship and materials for the period of ONE YEAR from the date of original purchase.

This manual is also suitable for:

9526nbh9527nb9528nb

Table of Contents