Storing The Parking Position - Mercedes-Benz E-Class Coupe Operator's Manual

Immediately change out of clothing which
R
has come into contact with electrolyte.
If an allergic reaction occurs, seek medical
R
attention immediately.
The rear-view mirror and the exterior mirror on
the driver's side automatically go into anti-glare
mode if the following conditions are met simul-
taneously:
the ignition is switched on and
R
incident light from headlamps strikes the sen-
R
sor in the rear-view mirror
The mirrors do not go into anti-glare mode if
reverse gear is engaged.
Parking position for the exterior mir-
ror on the front-passenger side
Setting and storing the parking position
You can position the front-passenger side exte-
rior mirror in such a way that you can see the
rear wheel on that side as soon as you engage
reverse gear. You can store this position.
Using reverse gear
Button for the driver's side exterior mirror
:
Button for the front-passenger side exterior
;
mirror
= Adjustment button
Memory button M
?
Stop the vehicle and turn the SmartKey to
X
position 2 in the ignition lock (
Press button ; for the exterior mirror on the
X
front-passenger side.
Engage reverse gear.
X
The exterior mirror on the front-passenger
side moves to the preset parking position.
Use adjustment button = to adjust the exte-
X
rior mirror to a position that allows you to see
the rear wheel and the curb.
The parking position is stored.
i
If you shift the transmission to another posi-
tion, the exterior mirror on the front-
passenger side returns to the driving position.
Using the memory button
You can store the parking position of the exte-
rior mirror on the front-passenger side using
memory button M ?. The reverse gear must not
be engaged.
Turn the SmartKey to position 2 in the ignition
X
lock (
With the exterior mirror on the front-
X
passenger side activated, use adjustment
button = to adjust the exterior mirror. In the
exterior mirror, the rear wheel and the curb
should be visible.
Press memory button M ? and one of the
X
arrows on adjustment button = within three
seconds.
The parking position is stored if the exterior
mirror does not move.
If the mirror moves out of position, repeat
X
these steps.
Calling up a stored parking position set-
ting
Turn the SmartKey to position 2 in the ignition
X
lock (
Adjust the exterior mirror on the front-
X
passenger side using button ;.
Engage reverse gear.
X
The exterior mirror on the front-passenger
side moves to the stored parking position.
The exterior mirror on the front-passenger side
moves back to its original position:
as soon as you exceed a speed of 9 mph
R
(15 km/h)
page 122).
if you press button : for the exterior mirror
Y R
on the driver's side
page 122).
Y
page 122).
Y
Mirrors
101
Z