Opening And Closing - Mercedes-Benz E-Class Coupe Operator's Manual

Make sure that no body parts are in close
proximity during the closing procedure. If
someone becomes trapped, press the switch
to open the side window again.
Opening and closing the side win-
dows
The switches for all side windows are located on
the driver's door. There is also a switch on the
front-passenger door as well as on the doors in
the rear compartment on the left and right-hand
sides for the respective side window.
The switches on the driver's door take prece-
dence.
Front left
:
Front right
;
Rear right
=
? Rear left
Turn the SmartKey to position 1 or 2 in the
X
ignition lock.
To open manually: press and hold the cor-
X
responding switch.
To open fully: press the switch beyond the
X
point of resistance and release it.
Automatic operation is started.
To close manually: pull and hold the corre-
X
sponding switch.
To close fully: pull the corresponding switch
X
beyond the pressure point.
Automatic operation is started.
To interrupt automatic operation: press/
X
pull the corresponding switch again.
You can start automatic operation when open-
ing and closing the front door windows and
when opening the rear door windows. To do so,
briefly press or pull the switch to beyond the
point of resistance in the relevant direction. You
can stop automatic operation by pressing or
pulling again.
You can continue to operate the side windows
after you switch off the engine or remove the
SmartKey. This function is available for up to five
minutes or until the driver's or front-passenger
door is opened.
When the override feature for the side windows
is activated, the side windows cannot be oper-
ated from the rear ( page 61).
Y
Convenience opening
General notes
You can ventilate the vehicle before you start
driving. To do this, the SmartKey is used to carry
out the following functions simultaneously:
unlock the vehicle
R
open the side windows
R
open the panorama roof with power tilt/slid-
R
ing panel and the roller sunblind
switch on the seat ventilation for the driver's
R
seat
The convenience opening feature can only be
operated using the SmartKey. The SmartKey
must be in close proximity to the vehicle.
The "convenience opening" feature is also avail-
able when the vehicle is unlocked.
Convenience opening
Press and hold the % button until the side
X
windows and the panorama roof with power
tilt/sliding panel are in the desired position.
If the roller sunblind of the panorama roof
with power tilt/sliding panel is closed, the
roller sunblind is opened first.
Press and hold the % button again until the
X
panorama roof with power tilt/sliding panel is
in the desired position.
To interrupt convenience opening: release
X
the % button.
Side windows
Z
83