Defrosting The Windshield - Mercedes-Benz E-Class Coupe Operator's Manual

Setting the air distribution
Turn the SmartKey to position 2 in the ignition
X
lock ( page 122).
Y
Dual-zone automatic climate control: press
X
air distribution adjustment switch F up or
down, until the desired symbol appears in the
display ( page 112).
Y
3-zone automatic climate control: press air
X
distribution adjustment switch I up or
down, until the desired symbol appears in the
display ( page 113).
Y
Setting the airflow
Dual-zone automatic climate control
Turn the SmartKey to position 2 in the ignition
X
lock ( page 122).
Y
To increase or reduce: press airflow adjust-
X
ment switch G up or down (
3-zone automatic climate control
Turn the SmartKey to position 2 in the ignition
X
lock ( page 122).
Y
To increase or reduce: press airflow adjust-
X
ment switch H up or down (
If the battery is not sufficiently charged, blower
output may be reduced. As soon as the battery
is sufficiently charged, full blower output will be
available.
Switching the ZONE function on/off
To activate: press the á button.
X
The indicator lamp above the á button
lights up.
Dual-zone automatic climate control: the tem-
perature setting for the driver's side is not
adopted for the front-passenger side.
3-zone automatic climate control: the tem-
perature setting for the driver's side is not
adopted for the front-passenger side and the
rear compartment.
To deactivate: press the á button.
X
The indicator lamp above the á button
goes out.
Dual-zone automatic climate control: the tem-
perature setting for the driver's side is adop-
ted for the front-passenger side.
Operating the climate control systems
3-zone automatic climate control: the tem-
perature setting for the driver's side is adop-
ted for the front-passenger side and the rear
compartment.

Defrosting the windshield

You can use this function to defrost the wind-
shield or to clear a fogged up windshield or side
windows on the inside.
Switch off the "Windshield defrosting" function
as soon as the windshield is clear again.
Turn the SmartKey to position 2 in the ignition
X
lock (
To activate: press the ¬ button.
X
The indicator lamp above the ¬ button
lights up.
The climate control system switches to the
following functions:
page 112).
R
Y
R
R
R
If the battery is not sufficiently charged, blower
output may be reduced. Once the battery is suf-
page 113).
Y
ficiently charged again, full blower output will be
available again.
To deactivate: press the ¬ button.
X
The indicator lamp above the ¬ button
goes out. The previously selected settings are
restored. Air-recirculation mode remains
deactivated.
MAX COOL maximum cooling
The MAX COOL function is only available in vehi-
cles for the USA.
MAX COOL is only operational when the engine
is running.
To activate: press the Ù button.
X
The indicator lamp in the Ù button lights
up.
To deactivate: press the Ù button.
X
The indicator lamp in the Ù button goes
out. The previously selected settings are
restored.
page 122).
Y
high airflow
high temperature
air distribution to the windshield and front
side windows
air-recirculation mode off
117