Removing Front Wheel - BMW F 700 GS Rider's Manual

The sensor rings are essential
9
for correct road-speed calcula-
tion, and they too must match
116
the motorcycle's control sys-
tems and consequently cannot
be changed.
If you decide that you would like
to fit non-standard wheels to
your motorcycle, it is very im-
portant to consult a specialist
workshop beforehand, preferably
an authorised BMW Motorrad
dealer. In some cases, the data
programmed into the control
z
units can be changed to suit the
new wheel sizes.
RDC adhesive label
with tyre pressure monitoring
OE
(RDC)
ATTENTION
Tyre removal not in compli-
ance with correct procedure.
Damage to RDC sensors.
Be sure to explain to the spe-
cialist workshop or authorised
BMW Motorrad dealer that the
wheel is fitted with an RDC
sensor.
If the motorcycle is equipped
with RDC, each wheel rim bears
an adhesive label indicating the
position of the RDC sensor.

Removing front wheel

Make sure the ground is level
and firm and place the motor-
cycle on its stand.
Remove screw 1 and remove
the ABS sensor from its bore.