Removing Rear Wheel - BMW F 700 GS Rider's Manual

9
120
Tighten right axle clamping
screw 1 to the specified tight-
ening torque.
Clamping screw (quick-
z
release axle) in tele-
scopic fork
19 Nm

Removing rear wheel

Make sure the ground is level
and firm and place the mo-
torcycle on a suitable auxiliary
stand.
OE
with centre stand
Make sure the ground is level
and firm and place the motor-
cycle on its centre stand.
Remove screw 1 and remove
the speed sensor from its bore.
Remove axle nut 2.
Slacken locknuts 3 on left and
right by turning them counter-
clockwise.
Back off adjusting screws 4 on
left and right by turning them
counter-clockwise.
Remove adjusting plate 5 and
push the axle in as far as it will
go.