Shutoff Time; Setting The Program Time - Cuisinart DGB-700 Series Instruction Booklet

Exiting Time Set Mode
a. Press any function button besides
Hour or Minute to exit mode and
activate the selected function.
b. If you do nothing for 5 seconds the
mode will be exited.

SETTING THE PROGRAM TIME

When you press the Program button,
it displays a previously selected auto-on
time, or the default time (12:00pm).
Entering Set Program Time Mode
Press and hold the Program set
button until the green light and LCD
display begin to flash. You are now in
Set Program Time mode. Set the time
you want coffee to begin brewing by
following the instructions in Entering
Time Set Mode, page 7. The
coffeemaker will start to brew at the
programmed time. The Program mode
cannot be entered if the coffeemaker
is in its brew cycle.
Exiting Set Program Time Mode
a. Press and release Program button.
b. Press any function button besides
Hour or Minute to exit mode and
activate the selected function.
c. If you do nothing for a period of five
seconds the mode will be exited.
SETTING THE AUTOMATIC

SHUTOFF TIME

Your coffeemaker can be programmed to
automatically shut off from 0 to 4 hours after
brewing is complete. Shutoff time can be
programmed before, during or after brewing.
Default shutoff time is 2 hours.
Entering Automatic Shutoff Time
Mode
To view the current setting, press and
hold the On/Off button until the red
light and LCD display begin to flash. Set
desired shutoff time by pressing the
Hour button to scroll from 0 to 4 hours.
To exit, do nothing for 5 seconds.
Programming Automatic Shutoff Time
After Brewing is Complete
When programming shutoff time after
brewing is completed, the unit
automatically accounts for elapsed time.
For example, if you set the shutoff time
for 1 hour, and 25 minutes have already
elapsed, the unit will shut off after 35
minutes (60 – 25 = 35 minutes).
8