Table of Contents
Advertisement
²
– If the buttons are held down, the set values automatically run
– The respective programme duration is displayed by selecting
Ø
Ø
Ø
Z
Rinse Plus
Rinse Hold
16
through.
the programme. The programme duration is adjusted while
the programme is running if the programme duration requires
changing, e.g. due to changes in the programme settings/
options, foam detection, unbalanced load detection, the load
or soiling.
EcoPerfect:
For saving energy with a comparable washing effect to the
standard programme. When selected, the display lamp is lit.
SpeedPerfect:
For a shorter wash time with a comparable washing effect to
the standard programme. Observe maximum load. Refer
to ~ Page 22 When selected, the display lamp is lit.
Options. Overview of all options ~ Page 29
Select Options and e.g.
60°C
Water Plus
Ö
– Select option by pressing the two buttons displayed on the
left.
– Select/deselect option by pressing the two buttons
displayed on the right. The selected options are
immediately active.
In the case of multi-level settings keep touching the
buttons to run through the settings automatically.
– Wait or back to the main menu by pressing Options
button.
Z
Water Plus buttons:
B
2:31h
1400
Ö
Z
Â
on
Ö
Ö
Advertisement
Table of Contents
