Your new washing machine Display rules : Warning! You have chosen a Bosch washing machine. This combination of symbol and signal word indicates a possibly dangerous Please take a few minutes to read and situation. Not heeding the warning can become familiar with the advantages of cause death or injuries.
Intended use Intended use This appliance is intended for private ■ I n t e n d e d u s e domestic use only. Do not install or operate this ■ appliance anywhere that is liable to experience frost and/or outdoor conditions.
Safety instructions Do not allow children to Safety instructions ■ clean or maintain this appliance unsupervised. T he following safety information Keep children under 3 years S a f e t y i n s t r u c t i o n s and warnings are provided to ■...
Safety instructions Warning Installation Risk of suffocation! Warning If allowed to play with the Risk of electric shock/fire/ packaging/plastic film or material damage/damage to packing components, children the appliance! may become caught in these or If the appliance is not installed pull them over their heads and properly, this may lead to a suffocate.
Page 8
Safety instructions If using a residual current Warning ■ circuit breaker, only use one Risk of injury/material that bears the following damage/damage to the mark: z. The presence of appliance! this mark is the only way to The appliance may vibrate or ■...
Safety instructions If the water hoses are altered Warning ■ or damaged, this may result Risk of injury! in material damage or The appliance is very heavy. ■ damage to the appliance. Lifting it may result in injury. The water hoses must not be Do not lift the appliance on kinked, crushed, altered or your own.
Safety instructions If you reach into the drum Operation ■ while it is still rotating, you Warning risk injuring your hands. Risk of explosions/fire! Wait until the drum has Laundry that has been stopped rotating. pretreated with cleaning agents Warning that contain solvents, e.g.
Safety instructions Never take hold of the mains Caution! ■ plug with wet hands. Material damage/damage to When removing the mains the appliance ■ plug from the socket, always If the amount of laundry in ■ take hold of the plug itself the appliance exceeds its and never the mains cable, maximum load capacity, it...
Page 12
Safety instructions Warning Risk of injury/material damage/damage to the appliance! The use of spare parts and accessories supplied by other brands is dangerous and may result in injury, material damage or damage to the appliance. For safety reasons, use genuine spare parts and accessories only.
Environmental protection water consumption in the selected Environmental programmes. The more display segments are protection visible, the higher the respective consumption. P ackaging/used appliance This enables you to compare the E n v i r o n m e n t a l p r o t e c t i o n consumption levels of the different Dispose of packaging in an programmes when choosing your...
Positioning and connecting ( Mains cable Positioning and 0 Bag: connecting Installation and operating ■ instructions I ncluded with the appliance Customer services location ■ P o s i t i o n i n g a n d c o n n e c t i n g directory* Check the machine for transport Note:...
Positioning and connecting Safety instructions Installation surface The washing machine be stable Warning Note: so that it does not move around. Risk of injury! The installation surface must be firm The washing machine is very heavy. ■ ■ and level. Be careful when lifting/transporting Soft floors/floor coverings are not the washing machine.
Positioning and connecting Installing the appliance in a Take the hoses out of the holders. kitchenette Warning Danger of death! There is a risk of electric shock if you touch live components. Do not remove the appliance covering plate. Unscrew and remove all four transportation securing bolts with a Notes wrench (WAF 13).
Positioning and connecting Hose and cable lengths Left-hand connection ■ Right-hand connection ■ The following are available from Tip: specialist dealers/customer services: Extension for Aqua-Stop and cold ■ water supply hose (approx. 2.50 m); order no. WM Z2380, WZ 10130, CZ 11350, Z 7070X0 A longer supply hose (approx.
Positioning and connecting Water inlet When the tap is open, the water flow rate is at least 8 l/min. Warning If the water pressure is higher than this, Danger of death! a pressure-reducing valve must be There is a risk of electric shock if you installed.
Positioning and connecting Water outlet Connection Drainage into a washbasin Warning ■ Risk of scalding! When you are washing at high temperatures, there is a risk of scalding if you come into contact with hot water (e.g. when draining hot water into a washbasin).
Positioning and connecting Levelling Align the appliance using a spirit level. Incorrect alignment may result in loud noises, vibrations and machine "movement". Loosen the lock nuts using a WAF17 spanner, by turning it in a clockwise direction. Check the alignment of the washing machine with a spirit level, and adjust it if necessary.
Positioning and connecting Electrical connection The mains plug can be accessed at ■ all times. If this is not possible, in order to comply with the relevant Warning safety regulations, a switch (2-pole Danger of death! switch-off) must be built into the There is a risk of electric shock if you permanent installation in accordance touch live components.
Positioning and connecting Before washing for the first time The washing machine was thoroughly tested before leaving the factory. To remove any water that may be left over from the test, run the first wash cycle without any laundry. Notes The washing machine must be ■...
Positioning and connecting Transportation E.g. when moving house Caution! Risk of damage to the appliance caused by detergent/fabric softener leaking from the dispensers. Leaking detergent/fabric softener can Before switching on the appliance prevent the appliance from working again: correctly, e.g. due to damage to the Notes electronics.
Main points in brief Main points in brief M a i n p o i n t s i n b r i e f Plug into the mains. Open the washing Sort the laundry. To switch on, press Turn on the tap. machine door.
Getting to know the appliance Getting to know the appliance W ashing machine G e t t i n g t o k n o w t h e a p p l i a n c e Service flap Detergent drawer with illuminated displays for the i- DOS dispenser on the drawer...
Getting to know the appliance Control panel All the buttons are sensitive i-DOS iIw, i-DOS w Note: (except for the main switch) and only ~ Page 39, need to be pressed lightly. An overview of all settings that can be selected ~ Page 31 Main switch Buttons Child lock 3 sec.
Getting to know the appliance Display panel Main menu after selecting the programme e.g. Easy Care The arrows on the display panel indicate in which direction the programme default settings can be changed using the buttons located above and below. To change, select the button under the programme highlighted in black and change the programme.
Page 28
Getting to know the appliance Options button selected and select, for example, the Rinse Hold ($) option: Using the buttons under the two left- hand arrows, select the option. Using the two right-hand arrows, select the displayed value. The selected options are active immediately and are displayed on the display panel.
Laundry Some examples of soiling levels can Laundry be found on ~ Page 30 – Light: Do not prewash, select the P repare the laundry SpeedPerfect setting if L a u n d r y necessary Caution! – Normal Damage to the appliance/fabrics –...
Detergent Saving energy and detergent Detergent For light and normal soiling, you can C orrect selection of detergent save energy (lower washing D e t e r g e n t temperature) and detergent. The care label is crucial for selecting the correct detergent, temperature and Saving Soiling/note...
Overview of programmes Overview of programmes P rogrammes on the programme selector O v e r v i e w o f p r o g r a m m e s Programme/type of laundry/instructions Settings Name of the programme Max.
Page 32
Overview of programmes Programme/type of laundry/instructions Settings Max. 4 kg Mixed load of cottons and synthetic fabrics Ž - 40 °C 0 - 1600** rpm ¦, (, x, T, Ï, Z, p, %, $, Á Detergent è, fabric softener è Delicates / Silk Max.
Page 33
Overview of programmes Programme/type of laundry/instructions Settings Kidswear * Max. 9 kg Hard-wearing items, heat-resistant items made of cotton or Ž - 90 °C linen; 400 - 1600** rpm energy-optimised washing that works by reducing the x, T, Ï, Z, p, %, $, Á temperature while achieving a comparable washing result to the Cottons programme.
Page 34
Overview of programmes Programme/type of laundry/instructions Settings Night Wash * Max. 4 kg Particularly quiet programme for washing overnight; suitable for Ž - 40 °C items made from cotton, linen, synthetic or blended fabrics 0 - 1600** rpm Notes ¦, (, x, T, Ï, Z, p, %, $ End signal deactivated, ■...
Page 35
Overview of programmes Programme/type of laundry/instructions Settings Lingerie * Max. 1 kg For delicate, washable underwear, e.g. made of velvet, lace, Ž - 40 °C Lycra, silk or satin 0 - 600** rpm ¦, (, x, Ï, Z, p, %, $, Á Detergent -, fabric softener è...
Page 36
Overview of programmes Programme/type of laundry/instructions Settings Spin * Extra spin with selectable speed 0 - 1600** rpm Detergent -, fabric softener - Drain * For the rinsing water, e.g. after the $ setting (Rinse Hold = no final spin cycle) Detergent -, fabric softener - Outdoor / Waterproofing * Max.
Overview of programmes Programme/type of laundry/instructions Settings Sportswear * Max. 2 kg Sportswear and leisurewear made from microfibre fabrics Ž - 40 °C Notes 0 - 800** rpm Laundry must not be treated with fabric softener. ■ ¦, (, x, T, Ï, Z, p, %, $, Before washing, clean the detergent drawer thoroughly ■...
Programme default settings Finished in Programme default The programme duration is shown after settings selecting the programme. Before starting the programme, you T he programme default settings are P r o g r a m m e d e f a u l t s e t t i n g s displayed in the main menu after can preselect the programme end in hourly increments (h = hour) up to a...
Additional programme settings/options Prewash * Additional programme settings/options (* Settings that can be selected: depending on the on – off model) For heavily soiled laundry. T he settings/options that are available Notes A d d i t i o n a l p r o g r a m m e s e t t i n g s / o p t i o n s depend on the model.
Additional programme settings/options Easy-Iron * Rinse Hold * Settings that can be selected: Settings that can be selected: on – off on – off Reduces creasing thanks to a special The washing remains in the water after spin sequence followed by fluffing and the last rinse cycle.
Additional programme settings/options Stains * The treatment of two stains explained in the following example: Blood In total, there are 16 different types of Blood is first “dissolved” in cold water, stain to choose from. then the selected wash programme starts.
Press the # button. The appliance is settings for each washing cycle. switched on. To do this, repeatedly press the The Bosch logo appears on the display corresponding button until the required and all indicator lamps light up. setting is displayed. ~ Page 38 The Cottons programme set at the factory is then always displayed.
Individual laundry Additional programme settings/options items may cause an unbalanced ~ Page 40 load. Wait until the Bosch logo no longer ■ Placing laundry into the drum appears before adding laundry. The load screen appears when the ■...
Operating the appliance Start the programme Note: Foam detection If Foam has been detected also Make sure that no items of laundry are appears on the display panel, the trapped between the door and the washing machine has detected too rubber seal, and close the door.
Operating the appliance Adding laundry Cancel the programme After starting the programme, you can For programmes at high temperatures: add or remove laundry if necessary. Press the A button. To cool down laundry: Select Rinse. Press the A button to do this. Press the A button.
Operating the appliance Removing laundry/switching off the appliance Open the loading door and remove the laundry. Follow the information on the display panel. Press the # button. The appliance is switched off. Turn off the tap. Not required for AquaStop Note: models.
Intelligent dosing system Notes Intelligent dosing Only use easy-pour liquid products ■ system that the manufacturer recommends adding to the detergent drawer. Do not mix different liquid I ntelligent dosing system in ■ detergents. If changing your liquid I n t e l l i g e n t d o s i n g s y s t e m the detergent drawer detergent (type, manufacturer, etc.), empty the dispenser completely and...
Intelligent dosing system When the appliance is switched on, the The dosage strength has been preset to fact that the detergent drawer is closed low (lightly soiled laundry) for completely is indicated by the following: detergent w and to medium (medium level of softness) for fabric softener i.
Intelligent dosing system Base dosage Set the basic detergent dosage according to the detergent's packaging label. Take your water hardness into The basic dosages are: consideration when doing so. For detergents – based on the Select the basic fabric softener dosage ■...
Intelligent dosing system Dispenser content for Manual dosage i-DOS iIw In addition to intelligent dosing, you can manually add cleaning aids (e.g. Instead of fabric softener, a second softener, bleach or stain remover) to liquid detergent can be used in the i- compartment v u, if necessary.
Page 52
Intelligent dosing system Dosing and adding detergent: Pull out the detergent drawer. Add the correct dosage to compartment v u depending on: – Soiling – Water hardness (ask your water supply company) – The amount of laundry – The manufacturer's instructions Close the detergent drawer.
Appliance settings To change the settings, press and hold Appliance settings both basic settings 3 sec. buttons for approx. 3 seconds. ~ Page 28 Y ou can change the following appliance A p p l i a n c e s e t t i n g s settings: Notes The settings are retained after the...
Sensors Dosing recommendation Sensors The dosing recommendation indicates a A utomatic load sensing recommended detergent dosage as a S e n s o r s percentage, depending on the selected Depending on the type of fabric and programme and the detected load. The load, the automatic load sensing indicated % refers to the dosing function optimally adjusts the water...
Cleaning and maintenance Machine housing/control Cleaning and panel maintenance Wipe the housing and the control ■ Warning panel with a soft, damp cloth. C l e a n i n g a n d m a i n t e n a n c e Remove the detergent residue Danger of death! ■...
Cleaning and maintenance i-DOS detergent draw and its The detergent drawer can be removed completely to allow you to housing clean to dispensers after you have emptied them. Emptying the dispensers: a) Empty the dispensers before The dispensers have emptying removing the drawer.
Cleaning and maintenance – Protect the rear drawer connector Turn off the water tap so that no against water, detergent or fabric- more water can flow in and has to be softener residue; if necessary, drained via the drain pump. clean the outer surfaces with a Switch off the appliance.
Cleaning and maintenance Put the service flap back on, lock it Filter in the water supply into place and close it. blocked First, reduce the water pressure in the supply hose: Turn off the tap. Select any programme (except Rinse/Spin/Empty). Press the A button.
Faults and what to do about them. Information on the display panel Display Cause/remedy Re-fill the i-DOS iIw, w The i-DOS dispensers are below the minimum fill level; top up ~ Page 48. dispenser i-DOS iIw, i-DOS w set i-DOS iIw, i-DOS w to off. error;...
Faults and what to do about them. Display Cause/remedy Drum care information: This instruction reminds you to carry out the Drum Clean 90 °C programme or a 60 °C programme to clean and care for the drum and the outer tub. Notes Run the programme without laundry.
Page 62
Faults and what to do about them. Faults Cause/remedy The water is not draining. Is $ selected (Rinse Hold = no final spin)? ~ Page 46 ■ Clean the drain pump. ~ Page 57 ■ Clean the drain pipe and/or the drain hose. ■...
After-sales service Faults Cause/remedy The display panel/ Power failure? ■ indicator lamps do not Have the fuses blown? Switch on/replace the fuses. ■ work while the appliance If the fault occurs repeatedly, call the after-sales service. ■ is running. There is detergent Some phosphate-free detergents contain water-insoluble residue.
Consumption rates Consumption rates E nergy and water consumption, programme duration and C o n s u m p t i o n r a t e s residual moisture for the main washing programmes (approximate values) Programme Additional Load Energy Water Programme...
Technical data Technical data T echnical data T e c h n i c a l d a t a Dimensions: 850 x 600 x 590 mm (height x width x depth) Weight: 70 - 85 kg (depending on model) Mains connection: Mains voltage 220 - 240 V, 50 Hz Nominal current 10 A...
Technical data Information for test institute Items Instruction Pre-treatment of new Run two empty runs of Cottons 90 °C with 1600 rpm: The appliance 1st run with 50g detergent and 8g anti sudsing agent, the 2nd run without detergent and sudsing agent. According to standard AS NZS 2040.1-2005 AS NZS 2040.2-2005...
Aqua-Stop warranty Aqua-Stop warranty O nly for appliances with Aqua-Stop A q u a - S t o p w a r r a n t y In addition to warranty claims against the vendor based on the purchase agreement and to our appliance warranty, we will provide compensation under the following conditions: If water damage is caused due to a...
Page 68
0344 892 8979 (Calls charged at local or mobile rate.) 01450 2655 (0.03 € per minute at peak. Off peak 0.0088 € per minute.) You can find the contact information for all countries in the attached after-sales service directory. Robert Bosch Hausgeräte GmbH Carl-Wery-Straße 34 81739 München, GERMANY *9001296091*...