Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Related Manuals for Bosch WAY328H0EU
Summary of Contents for Bosch WAY328H0EU
- Page 1 Washing machine WAY328H0EU en Instruction Manual and Installation Instructions...
- Page 2 Your new washing machine Display rules : Warning! You have chosen a Bosch washing machine. This combination of symbol and signal word indicates a possibly dangerous Please take a few minutes to read and situation. Not heeding the warning can become familiar with the advantages of cause death or injuries.
-
Page 3: Table Of Contents
Contents e n I n s t r u c t i o n M a n u a l a n d I n s t a l l a t i o n I n s t r u c t i o n s Intended use. - Page 4 Changing the programme ..45 Faults and what to do about Cancel the programme ..45 them..... . 63 Programme end during rinse hold .
-
Page 5: Intended Use
Intended use Intended use This appliance is intended for private ■ I n t e n d e d u s e domestic use only. Do not install or operate this ■ appliance anywhere that is liable to experience frost and/or outdoor conditions. -
Page 6: Safety Instructions
Safety instructions Do not allow children to Safety instructions ■ clean or maintain this appliance unsupervised. T he following safety information Keep children under 3 years S a f e t y i n s t r u c t i o n s and warnings are provided to ■... -
Page 7: Installation
Safety instructions Warning Installation Risk of suffocation! Warning If allowed to play with the Risk of electric shock/fire/ packaging/plastic film or material damage/damage to packing components, children the appliance! may become caught in these or If the appliance is not installed pull them over their heads and properly, this may lead to a suffocate. - Page 8 Safety instructions If using a residual current Warning ■ circuit breaker, only use one Risk of injury/material that bears the following damage/damage to the mark: z. The presence of appliance! this mark is the only way to The appliance may vibrate or ■...
-
Page 9: Operation
Safety instructions If the hoses and mains The appliance is secured for ■ ■ cables are not correctly transportation by transport routed, they may constitute a locking devices. If the tripping hazard, which may transport locking devices are result in injury. not removed before the Route hoses and cables appliance is operated, this... - Page 10 Safety instructions Warning Warning Risk of poisoning! Eye/skin irritation! Poisonous fumes may be given Detergent and care products off by cleaning agents that may spray out if the detergent contain solvents, e.g. cleaning drawer is opened while the solvent. appliance is in operation. Do not use cleaning agents that Rinse eyes/skin thoroughly if contain solvents.
-
Page 11: Cleaning/Maintenance
Safety instructions Cleaning/Maintenance Warning Risk of poisoning! Warning Poisonous fumes may be given Risk of death! off by cleaning agents that The appliance is powered by contain solvents, e.g. cleaning electricity. There is a risk of solvent. electric shock if you come into Do not use cleaning agents that contact with live components. - Page 12 Safety instructions Caution! Material damage/damage to the appliance Cleaning agents and agents for pretreating laundry (e.g. stain removers, prewash sprays, etc.) may cause damage if they come into contact with the surfaces of the appliance. Therefore please note: Do not allow these agents to ■...
-
Page 13: Environmental Protection
Environmental protection Information on energy and water ■ Environmental consumption: ~ Page 27 The displays provide information protection about the relative level of energy and water consumption in the selected P ackaging/used appliance programmes. E n v i r o n m e n t a l p r o t e c t i o n The more display segments are Dispose of packaging in an visible, the higher the respective... -
Page 14: Positioning And Connecting
Positioning and connecting ( Mains cable Positioning and 0 Bag: connecting Installation and operating ■ instructions I ncluded with the appliance Customer services location ■ P o s i t i o n i n g a n d c o n n e c t i n g directory* Check the machine for transport Note:... -
Page 15: Safety Instructions
Positioning and connecting Safety instructions Installation surface The washing machine be stable Warning Note: so that it does not move around. Risk of injury! The installation surface must be firm The washing machine is very heavy. ■ ■ and level. Be careful when lifting/transporting Soft floors/floor coverings are not the washing machine. -
Page 16: Installing The Appliance In A Kitchenette
Positioning and connecting Installing the appliance in a Take the hoses out of the holders. kitchenette Warning Danger of death! There is a risk of electric shock if you touch live components. Do not remove the appliance covering plate. Unscrew and remove all four transportation securing bolts with a Notes wrench (WAF 13). -
Page 17: Hose And Cable Lengths
Positioning and connecting Hose and cable lengths Left-hand connection ■ Right-hand connection ■ The following are available from Tip: specialist dealers/customer services: Extension for Aqua-Stop and cold ■ water supply hose (approx. 2.50 m); order no. WM Z2380, WZ 10130, CZ 11350, Z 7070X0 A longer supply hose (approx. -
Page 18: Water Inlet
Positioning and connecting Water inlet When the tap is open, the water flow rate is at least 8 l/min. Warning If the water pressure is higher than this, Danger of death! a pressure-reducing valve must be There is a risk of electric shock if you installed. -
Page 19: Water Outlet
Positioning and connecting Water outlet Connection Drainage into a washbasin Warning ■ Risk of scalding! When you are washing at high temperatures, there is a risk of scalding if you come into contact with hot water (e.g. when draining hot water into a washbasin). -
Page 20: Levelling
Positioning and connecting Levelling Notes The mains voltage and voltage ■ Align the appliance using a spirit level. indicated on the washing machine (rating plate) are the same. Incorrect alignment may result in loud The connected load and fuse noises, vibrations and machine required are specified on the rating "movement". -
Page 21: Before Washing For The First Time
Positioning and connecting Before washing for the first time The washing machine was thoroughly tested before leaving the factory. To remove any water that may be left over from the test, run the first wash cycle without any laundry. Notes The washing machine must be ■... -
Page 22: Transportation
Positioning and connecting Transportation E.g. when moving house Caution! Risk of damage to the appliance caused by detergent/fabric softener leaking from the dispensers. Leaking detergent/fabric softener can Before switching on the appliance prevent the appliance from working again: correctly, e.g. due to damage to the Notes electronics. -
Page 23: Main Points In Brief
Main points in brief Main points in brief M a i n p o i n t s i n b r i e f Plug into the mains. Open the washing Sort the laundry. To switch on, press Turn on the tap. machine door. -
Page 24: Getting To Know The Appliance
Getting to know the appliance Getting to know the appliance W ashing machine G e t t i n g t o k n o w t h e a p p l i a n c e Service flap Detergent drawer with illuminated displays for the i- DOS dispenser on the drawer... -
Page 25: Control Panel
Getting to know the appliance Control panel All the buttons are sensitive Buttons basic settings 3 sec. for Note: (except for the main switch) and only changing the appliance settings, need to be pressed lightly. e.g. button signals, an overview of all selectable settings that can be selected Main switch To switch the appliance on/off:... - Page 26 Getting to know the appliance The Remote Start } button releases the appliance so that the programme can be started remotely via the Home Connect app. Remote start remains enabled for 24 hours after it has been activated. It is automatically deactivated if you do not start the programme via the Home Connect app during this...
-
Page 27: Display Panel
Getting to know the appliance Display panel Main menu after selecting the programme e.g. Easy-Care f The arrows on the display panel indicate in which direction the programme default settings can be changed using the buttons located above and below. To change, select the button under the programme highlighted in black and change the programme. - Page 28 Getting to know the appliance Options ² button selected and select, for example, the Rinse Hold ($) option: Using the buttons under the two left- hand arrows, select the option. Using the two right-hand arrows, select the displayed value. The selected options are active immediately and are displayed on the display panel.
-
Page 29: Laundry
Laundry Some examples of soiling levels can Laundry be found on ~ Page 30 – Light: Do not prewash, select the P repare the laundry SpeedPerfect setting if L a u n d r y necessary Caution! – Normal Damage to the appliance/fabrics –... -
Page 30: Detergent
Detergent Saving energy and detergent Detergent For light and normal soiling, you can C orrect selection of detergent save energy (lower washing D e t e r g e n t temperature) and detergent. The care label is crucial for selecting the correct detergent, temperature and Saving Soiling/note... -
Page 31: Overview Of Programmes
Overview of programmes Overview of programmes P rogrammes on the programme selector O v e r v i e w o f p r o g r a m m e s Programme/type of laundry/instructions Settings Name of the programme Max. - Page 32 Overview of programmes Programme/type of laundry/instructions Settings Easy-Care f Max. 4 kg Textiles made of synthetic materials or blended fabrics Ž - 60 °C 0-1200** rpm ¦, (, x, T, Ï, Z, p, %, $, Á Detergent è, fabric softener è Mix o Max.
- Page 33 Overview of programmes Programme/type of laundry/instructions Settings Super Quick 15’/30’ ]/, * Max. 2/3,5 kg Extra-short programme of approx. 15/30 minutes, suitable for small Ž - 40 °C items of lightly soiled laundry 0-1200** rpm The Super Quick 15’ programme is run for the Note: .
- Page 34 Overview of programmes Programme/type of laundry/instructions Settings Shirts ’ Max. 2 kg Non-iron shirts or blouses made of cotton, linen, synthetic fibres or Ž - 60 °C blended fabrics 0-800** rpm Notes ¦, (, x, T, Ï, Z, p, %, Shirts/blouses are only given a short spin on the Less ironing ■...
- Page 35 Overview of programmes Programme/type of laundry/instructions Settings Rinse * Rinse Plus with spin 0-1600** rpm Z, Ï, $, p Detergent -, fabric softener è Spin * Extra spin with selectable speed 0-1600** rpm Detergent -, fabric softener - Drain * For the rinsing water, e.g.
-
Page 36: Starching
Overview of programmes Programme/type of laundry/instructions Settings Sportswear ] * Max. 2 kg Sportswear and leisurewear made from microfibre fabrics Ž-40 °C Notes 0-800** rpm Laundry must not be treated with fabric softener. ■ ¦, (, x, T, Ï, Z, p, %, Before washing, clean the detergent drawer thoroughly (manual ■... -
Page 37: Programme Default Settings
Programme default settings Finished in ñ Programme default The programme duration is shown after settings selecting the programme. Before starting the programme, you T he programme default settings are P r o g r a m m e d e f a u l t s e t t i n g s displayed in the main menu after can preselect the programme end in hourly increments (h = hour) up to a... -
Page 38: I-Dos Settings
Programme default settings i-DOS settings i-DOS i for fabric softener Dosage strengths Your washing machine has an intelligent dosing system for liquid detergent and High: high level of softness ª fabric softener (or detergent when using Medium: medium level of softness ©... -
Page 39: Additional Programme Settings/Options (* Depending On The Model)
Additional programme settings/options Prewash * Additional programme settings/options Settings that can be selected: (* depending on the on – off model) For heavily soiled laundry. T he settings/options that are available Notes A d d i t i o n a l p r o g r a m m e s e t t i n g s / o p t i o n s depend on the model. -
Page 40: Water Plus
Additional programme settings/options Water Plus * Press the A button after approx. 10 minutes. The laundry remains in the soaking solution. Leave the laundry to soak for as long Settings that can be selected: as required, then either press the A on –... -
Page 41: Stains
Additional programme settings/options Stains * The treatment of two stains explained in the following example: Blood In total, there are 16 different types of Blood is first “dissolved” in cold water, stain to choose from. then the selected wash programme starts. -
Page 42: Operating The Appliance
Press the # button. The appliance is settings for each washing cycle. switched on. To do this, repeatedly press the The Bosch logo appears on the display corresponding button until the required and all indicator lamps light up. setting is displayed. ~ Page 31 The Cottons i programme set at the factory is then always displayed. -
Page 43: Select Additional Programme
Individual laundry Additional programme settings/options items may cause an unbalanced ~ Page 39 load. Wait until the Bosch logo no longer ■ Placing laundry into the drum appears before adding laundry. The load screen appears when the ■... -
Page 44: Start The Programme
Operating the appliance Start the programme Note: Foam detection If Foam has been detected also Make sure that no items of laundry are appears on the display panel, the trapped between the door and the washing machine has detected too rubber seal, and close the door. -
Page 45: Adding Laundry
Operating the appliance Adding laundry Cancel the programme After starting the programme, you can For programmes at high temperatures: add or remove laundry if necessary. Press the A button. To cool down laundry: Select Rinse. Press the A button to do this. Press the A button. -
Page 46: Removing Laundry/Switching Off The Appliance
Operating the appliance Removing laundry/switching off the appliance Open the loading door and remove the laundry. Follow the information on the display panel. Press the # button. The appliance is switched off. Turn off the tap. Not required for AquaStop Note: models. -
Page 47: Intelligent Dosing System
Intelligent dosing system Notes Intelligent dosing Only use easy-pour liquid products ■ system that the manufacturer recommends adding to the detergent drawer. Do not mix different liquid I ntelligent dosing system in ■ detergents. If changing your liquid I n t e l l i g e n t d o s i n g s y s t e m the detergent drawer detergent (type, manufacturer, etc.), empty the dispenser completely and... -
Page 48: Everyday Use
Intelligent dosing system When the appliance is switched on, the The dosage strength has been preset to following indicates that the detergent low (lightly soiled laundry) for drawer is closed completely: detergent w and to medium (medium level of softness) for fabric softener i. It The corresponding illuminated ■... -
Page 49: Base Dosage
Intelligent dosing system Base dosage Set the basic detergent dosage according to the detergent's packaging label. Take your water hardness into The basic dosages are: consideration when doing so. For detergents – based on the Select the basic fabric softener dosage ■... -
Page 50: Dispenser Content For I-Dos Iiw
Intelligent dosing system Dispenser content for Manual dosage i-DOS iIw In addition to intelligent dosing, you can manually add cleaning aids (e.g. Instead of fabric softener, a second softener, bleach or stain remover) to liquid detergent can be used in the i- compartment v u, if necessary. - Page 51 Intelligent dosing system Dosing and adding detergent: Pull out the detergent drawer. Add the correct dosage to compartment v u depending on: – Soiling – Water hardness (ask your water supply company) – The amount of laundry – The manufacturer's instructions Close the detergent drawer.
-
Page 52: Home Connect
Home Connect Notes Home Connect Please observe the safety ■ precautions in this instruction T his appliance is Wi-Fi-capable and can manual and make sure that these H o m e C o n n e c t be remotely controlled using a mobile are complied with even when device. -
Page 53: Connecting To The Home Network And The Home Connect App
Home Connect Connecting to the home The appliance now attempts to connect to your home network. | flashes in the network and the Home display. Connect app Connect your appliance to the home network automatically or manually (you only need to do this the first time). Notes If your home network router has a ■... - Page 54 Home Connect The appliance now sets up its own Wi-Fi If you are not able to establish a Note: network with the name (SSID) connection, check whether your appliance is within range of your home HomeConnect. network. Try connecting manually again. Connecting to the Home Connect app Step 3 If your appliance is connected to your...
-
Page 55: Activating/Deactivating Wi-Fi
Home Connect Activating/deactivating Wi-Fi If your appliance is already connected to your home network, you can activate or deactivate Wi-Fi on your appliance. Ensure that you are in the Home Connect menu. ~ Page 52 Press Wi-Fi on/off. Press on or off. If you want to operate your Note: appliance via the Home Connect app... -
Page 56: Information On Data Protection
Home Connect app. Information on data protection can be accessed in the Home Connect app. Declaration of Conformity Robert Bosch Hausgeräte GmbH hereby declares that the appliance with Home Connect functionality meets the basic requirements and other relevant provisions of the Directive 2014/53/EU. -
Page 57: Appliance Settings
Appliance settings Basic dosage: ■ Appliance settings i-DOS w Basic 10 ml – 200 ml Y ou can change the following appliance Set the basic dosage in accordance A p p l i a n c e s e t t i n g s settings: with the recommendation of the detergent manufacturer. -
Page 58: Sensors
Sensors Dosing recommendation Sensors The dosing recommendation indicates a A utomatic load sensing recommended detergent dosage as a S e n s o r s percentage, depending on the selected Depending on the type of fabric and programme and the detected load. The load, the automatic load sensing indicated % refers to the dosing function optimally adjusts the water... -
Page 59: Cleaning And Maintenance
Cleaning and maintenance Machine housing/control Cleaning and panel maintenance Wipe the housing and the control ■ Warning panel with a soft, damp cloth. C l e a n i n g a n d m a i n t e n a n c e Remove the detergent residue Danger of death! ■... -
Page 60: I-Dos Detergent Draw And Its Housing
Cleaning and maintenance i-DOS detergent draw and its The detergent drawer can be removed completely to allow you to housing clean to dispensers after you have emptied them. Emptying the dispensers: a) Empty the dispensers before The dispensers have emptying removing the drawer. -
Page 61: The Drain Pump Is Blocked, Emergency Draining
Cleaning and maintenance – Protect the rear drawer connector Turn off the water tap so that no against water, detergent or fabric- more water can flow in and has to be softener residue; if necessary, drained via the drain pump. clean the outer surfaces with a Switch off the appliance. -
Page 62: The Drain Hose At The Siphon Is Blocked
Cleaning and maintenance Filter in the water supply blocked First, reduce the water pressure in the supply hose: Turn off the tap. Select any programme (except Rinse/Spin/Empty). To prevent unused detergent Note: Press the A button. Allow the from flowing straight into the drain programme to run for approximately during the next wash, pour 1 litre of 40 seconds. -
Page 63: Faults And What To Do About Them
Faults and what to do about them. Faults and what to do about them. E mergency release F a u l t s a n d w h a t t o d o a b o u t t h e m . E.g. -
Page 64: Information On The Display Panel
Faults and what to do about them. Information on the display panel Display Cause/remedy Top up the i-DOS The i-DOS dispensers are below the minimum fill level; top up ~ Page 47. iIw, w container i-DOS iIw, i-DOS w Set i-DOS iIw, i-DOS w to Off. error;... -
Page 65: Faults And What To Do About Them
Faults and what to do about them. Display Cause/remedy Drum care This instruction reminds you to run the Drum clean 90 °C programme or a 60 °C information: programme to clean and care for the drum and the outer tub. Notes Run the programme without laundry. - Page 66 Faults and what to do about them. Faults Cause/remedy The drum briefly jerks or Not a fault – the internal motor test may cause the drum to jerk or judder briefly judders after the when the wash programme starts. programme has started. The water is not draining.
- Page 67 Faults and what to do about them. Faults Cause/remedy Home Connect is not You can find solutions to problems with Home Connect at www.home- ■ working. connect.com. The availability of the Home Connect functionality depends on the ■ availability of the Home Connect Services in your country. Home Connect Services are not available in every country - for further information please check: www.home-connect.com.
-
Page 68: After-Sales Service
After-sales service After-sales service I f you cannot rectify a fault yourself, A f t e r - s a l e s s e r v i c e contact customer services. ~ Cover page We will always find an appropriate solution in order to avoid unnecessary visits by engineers. -
Page 69: Consumption Rates
Consumption rates Consumption rates E nergy and water consumption, programme duration and C o n s u m p t i o n r a t e s residual moisture for the main washing programmes (approximate values) Programme Load Energy Water Programme consumption*... -
Page 70: Efficiency Test Programmes For Cotton Fabrics
Technical data Efficiency test programmes for cotton fabrics The following programmes (standard programmes, indicated by ü) are suitable for cleaning normally soiled cotton fabrics and are the most efficient with respect to combined energy and water consumption. Standard programmes for cottons in accordance with Regulation (EU) no. 1015/2010 Programme + temperature Load Approximate programme... -
Page 71: Aqua-Stop Warranty
Aqua-Stop warranty Aqua-Stop warranty O nly for appliances with Aqua-Stop A q u a - S t o p w a r r a n t y In addition to warranty claims against the vendor based on the purchase agreement and to our appliance warranty, we will provide compensation under the following conditions: If water damage is caused due to a... - Page 72 0344 892 8979 (Calls charged at local or mobile rate.) 01450 2655 (0.03 € per minute at peak. Off peak 0.0088 € per minute.) You can find the contact information for all countries in the attached after-sales service directory. Robert Bosch Hausgeräte GmbH Carl-Wery-Straße 34 81739 München, GERMANY *9001292271*...
Need help?
Do you have a question about the WAY328H0EU and is the answer not in the manual?
Questions and answers