Panasonic WJ-SX650 Series Operating Instructions Manual page 84

Function
A – B repeat playback
(Not available for WJ-RT416
Series)
• Sets the start point (A) for
the A - B repeat playback.
• Sets the end point (B) for
the A - B repeat playback.
• Cancels the A – B repeat
playback setting.
Filtering
(Not available for WJ-RT416
Series)
• ON
• OFF
Monitor 1 control
(Not available for WJ-RT416
Series)
• Camera selection
• Selects the next camera.
• Selects the previous cam-
era.
• Recorder On-screen display
(OSD) ON/OFF
• Multiscreen display
• Sequential display ON
• Electronic zoom
84
WV-CU950/650
Open "HD300 A - B Repeat"
menu. →
[F1]
[F2]
[F4]
Open "HD300 Listed" menu.
→
[F1]
[F2]
[RECORDER] +
Refer to p. 75 Camera selec-
tion.
Refer to p. 75 Selects the next
camera.
Refer to p. 75 Selects the pre-
vious camera.
Refer to p. 82 Recorder On-
screen display (OSD) ON/OFF.
Refer to p. 82 Multiscreen dis-
play.
Refer to p. 82 Sequential dis-
play ON.
Refer to p. 82 Electronic
zoom.
WV-CU360C/CJ
Not available
–
–
–
Not available
–
–
Not available
–
–
–
–
–
–
–
Note
Playback is started when you
mark the end point.
WV-CU950/650:
• Hold down this button until
the operation end.
• These operations are not
available if the recorder
image cannot be inter-
changeably displayed on
Monitor 1 (Example: While
the SETUP MENU of
recorder is displayed)