I Switch Settings For Video Input Main Board - Panasonic WJ-SX650 Series Operating Instructions Manual

Important:
• The software versions of Video Output Board 1 and 2
must be the same.
If the software version of each board is different,
upgrade the lower version to the higher one. (Refer to
p. 42 or p. 55 for how to check the software version.)
• Refer to the dealer for the version-up procedure. (Surely
follow the instructions and notes.)

I Switch Settings for Video Input Main Board

With the switch settings of main boards, board numbers are given to all video input boards. To give the board number to each
board, rotate the Unit No. switch on the main board.
Notes:
• The board number setting must be different from each other.
• "8", "9", and "A" to "F" are reserved settings. They cannot be set for board numbers.
Board number
1
2
3
4
5
6
7
8
RESET No.
MODE
Board number switch
Switch setting
0
1
2
3
4
5
6
7
17