Panasonic WJ-SX650 Series Operating Instructions Manual page 79

Function
Focus control
• Brings the lens focus farther
from the object.
• Brings the lens focus nearer
from the object.
• Adjusts the lens focus auto-
matically.
Zoom control
• Widen the scene.
• Zooms the image.
Patrol
• Starts the patrol setting.
• Ends the patrol setting.
• Activates the patrol play.
WV-CU950/650
[FOCUS FAR]
[FOCUS NEAR]
[B] or top button
Zoom wheel controller to the
left
Zoom wheel controller to the
right
Open "Patrol Learn" menu. →
[F1]
[F2]
Refer to p. 80 Auto mode.
WV-CU360C/CJ
[FOCUS FAR]
[FOCUS NEAR]
[FOCUS FAR] + [FOCUS
NEAR]
[ZOOM WIDE]
[ZOOM TELE]
[SHIFT] + [CAM FUNC] three
times (PATROL setting menu
appears on the LED display.)
→
[2]
[3]
[1]
Note
WV-CU950/650, WV-
CU360C/CJ:
Lens focus will keep going
farther from the object while
this button is held down.
WV-CU950/650, WV-
CU360C/CJ:
Lens focus will keep going
nearer from the object while
this button is held down.
WV-CU950/650:
You can assign another func-
tion to these buttons .
The setting is performed in
"Controller" – "Key
Assignment" of WJ-SX650
Series Administrator Console.
WV-CU950/650:
Lens zooming level will keep
going down while zoom wheel
controller is being moved to
the left.
WV-CU360C/CJ:
Lens zooming level will keep
going down while this button
is held down.
WV-CU950/650:
Lens zooming level will keep
going up while zoom wheel
controller is being moved to
the right.
WV-CU360C/CJ:
Lens zooming level will keep
going up while this button is
held down.
WV-CU950/650:
For cameras for which two or
more patrol settings are avail-
able, PATROL 1 is activated.
To perform other patrol set-
tings, open the camera setup
menu or perform the camera
function.
(Refer to the operating
instructions of camera for
details.)
79