Panasonic WJ-SX650 Series Operating Instructions Manual page 71

• ACTION
POWER: The unit is powered on. (Highlighted: Power
off)
M01 to 32: Alarm occurred to Monitor 1 to 32. (For
group sequence and group preset, the smallest
monitor number is displayed with "∗".)
C001 to C999: Camera 001 to Camera 999 was activat-
ed for spot mode.
T01 to 32: Tour Sequence 1 to 32 was activated.
G01 to 32: Group sequence (or Group preset) 1 to 32
was activated.
Notes:
• User ID and Controller information is displayed for
an alarm reset or suspended by an operator. (They
are not displayed for auto reset.)
• User ID and controller No. will be highlighted to
indicate alarm reset or alarm suspension OFF.
• REC
"Recording Source (LCN)" associated with the alarm event
is displayed.
Refer to p. 74 Lists of Operations and Functions for opera-
tions while the Alarm History Display is displayed on the
monitor.
71