Panasonic WJ-SX650 Series Operating Instructions Manual page 54

G VD2/DATA/CABLE COMPENSATION
Menu
530 VD2/DATA/CABLE COMPENSATION 1 of 2
INPUT BOARD=8
CAM VD2 DATA CABLE
225 ON OFF
226 ON OFF
227 ON OFF
228 ON OFF
229 ON OFF
230 ON OFF
231 ON OFF
232 ON OFF
CAM=CAMERA IN
DATA:CAMERA CONTROL SIGNAL
530 VD2/DATA/CABLE COMPENSATION 2 of 2
INPUT BOARD=8
CAM VD2 DATA CABLE
241 ON OFF
242 ON OFF
243 OFF OFF
244 OFF OFF
245 OFF OFF
246 OFF OFF
247 OFF OFF
248 OFF OFF
CAM=CAMERA IN
DATA:CAMERA CONTROL SIGNAL
• INPUT BOARD
Select a video input board from 1 to 8. (The factory default is 1.)
• VD2
Select ON or OFF. (The factory default is ON.)
ON: Sends the VD2 timing pulse with the camera output
signal.
OFF: Not sends the VD2 timing pulse with the camera out-
put signal.
• DATA
Select ON or OFF. (The factory default is ON.)
ON: Sends the control data with the camera output signal
via the coaxial cable.
OFF: Not sends the control data with the camera output
signal via the coaxial cable.
• CABLE
Perform the settings to compensate for the video signal
transmission loss from the camera (cable compensation)
according to the cable lengths. (The factory default is S.)
S: Less than 500 m {1 600 ft}
M: 500 m {1 600 ft} to 900 m {2 900 ft}
L: 900 m {2 900 ft} to 1 200 m {4 000 ft}
Note: When supplying video input signals from recorders
or using cameras of other manufacturers, set VD2 and
DATA to OFF.
54
CAM VD2 DATA CABLE
S 233 ON OFF S
M 234 ON OFF S
L 235 ON OFF S
S 236 ON OFF S
M 237 ON ON S
L 238 ON ON S
S 239 ON ON S
S 240 ON ON S
CAM VD2 DATA CABLE
S 249 OFF OFF S
M 250 OFF OFF S
L 251 OFF OFF S
S 252 OFF OFF S
M 253 OFF OFF S
L 254 OFF OFF S
S 255 OFF OFF S
S 256 OFF OFF S
G RS485 CAMERA Menu
540 RS485 CAMERA
INPUT BOARD=8
CAM RS485 UNIT
225 29 1
226 29 2
227 29 3
228 29 4
229 29 5
230 29 6
231 29 7
232 29 8
COMMUNICATION STATUS 19200/8/ NONE/1
CAM=CAMERA IN
540 RS485 CAMERA
INPUT BOARD=8
CAM RS485 UNIT
241 31 1
242 32 1
243
244
245
246
247
248
COMMUNICATION STATUS 19200/8/ NONE/1
CAM=CAMERA IN
• INPUT BOARD
Select a video input board from 1 to 8. (The factory default
is 1.)
• RS485
Select the RS-485 (CAMERA) port connecting RS-485 cam-
eras. (The factory default is no settings.)
CAM001 to 032: 1 to 4 (INPUT BOARD=1)
CAM033 to 064: 5 to 8 (INPUT BOARD=2)
CAM065 to 096: 9 to 12 (INPUT BOARD=3)
CAM097 to 128: 13 to 16 (INPUT BOARD=4)
CAM129 to 160: 17 to 20 (INPUT BOARD=5)
CAM161 to 192: 21 to 24 (INPUT BOARD=6)
CAM193 to 224: 25 to 28 (INPUT BOARD=7)
CAM225 to 256: 29 to 32 (INPUT BOARD=8)
• UNIT
Select the unit numbers for the connected RS-485 cameras.
1 to 8 is available.
Note: RS485 is not available for camera input channels
accepting video input signals from recorders. To activate
RS-485 camera connections, change the settings in the
RECORDER menu. (Refer to p. 51.)
1 of 2
CAM RS485 UNIT
233 30 1
234 30 2
235 30 3
236 30 4
237
238
239
240
RS485=RS485(CAMERA)
2 of 2
CAM RS485 UNIT
249
250
251
252
253
254
255
256
RS485=RS485(CAMERA)