I Sequence Pause; I Sequence Stop - Panasonic WJ-SX650 Series Operating Instructions Manual

I Sequence Pause

You can pause an active tour or group sequence. When a
group sequence is paused on a monitor, all sequences will
be simultaneously paused on other monitors.
1. Press the SEQ PAUSE*
Sequence will be paused.
2. Press the SEQ PAUSE*
restart the sequence.
1
* WV-CU950/650
2
* WV-CU360C/CJ
Available operations during sequence pause
• Sequence step forward/backward
You can move the sequence one frame to the next or
previous step by pressing the + or – button.
• Camera control
You can control the camera whose image is being dis-
played on the monitor.

I Sequence Stop

When a tour or group sequence is stopped, the camera at
the stopped step will be selected. When a group sequence
is stopped on a monitor, all sequences will be simultane-
ously stopped on other monitors.
G WV-CU950/650
Press the SEQ STOP button while holding down the SHIFT
button.
Sequence will be stopped.
G WV-CU360C/CJ
Press the STOP button.
Sequence will be stopped.
G Note
Sequence will also be stopped when you select a camera
during the sequence is activated. Then, the image of
selected camera will be displayed on the monitor.
66
1 2
(or PAUSE* ) button.
1 2
(or PAUSE* ) button again to