Bosch GWS Professional 24-230 VX Original Instructions Manual page 18

OBJ_DOKU-27975-001.fm Page 19 Thursday, September 15, 2011 8:31 AM
When cutting in stone, provide for sufficient dust extraction.
With approved sanding tools, the machine can be used for
sanding with sanding discs.
Product Features
The numbering of the product features refers to the illustra-
tion of the machine on the graphics page.
1 Spindle lock button
2 Vibration damper
3 On/Off switch
4 Auxiliary handle (insulated gripping surface)
5 Grinder spindle
6 Protection guard for grinding
7 Encoding key
8 Clamping lever for protection guard
9 Screw for adjustment of protection guard
10 Mounting flange with O-ring
11 Grinding disc*
Technical Data
Angle Grinder
Article number
Rated power input
Output power
Rated speed
Grinding disc diameter, max.
Thread of grinder spindle
Thread length (max.) of grinder spindle
Restarting Protection
Reduced starting current
Rotatable main handle
Run-on Brake
Weight according to EPTA-Procedure
01/2003
Protection class
The values given are valid for a nominal voltage [U] of 230 V. For different voltages and models for specific countries, these values can vary.
Please observe the article number on the type plate of your machine. The trade names of the individual machines may vary.
Only for power tools without reduced starting current: Starting cycles generate brief voltage drops. Interference with other equipment/machines may
occur in case of unfavourable mains system conditions. Malfunctions are not to be expected for system impedances below 0.25 ohm.
Noise/Vibration Information
Measured sound values determined according to EN 60745.
Typically the A-weighted noise levels of the product are: Sound pressure level 91 dB(A); Sound power level 102 dB(A). Uncer-
tainty K =3 dB.
Wear hearing protection!
Bosch Power Tools
12 Clamping nut
13 Quick-clamping nut
14 Carbide grinding head*
15 Protection guard for cutting*
16 Cutting disc*
17 Hand guard*
18 Spacer discs*
19 Rubber sanding plate*
20 Sanding sheet*
21 Round nut*
22 Cup brush*
23 Cutting guide with dust extraction protection guard *
24 Diamond cutting disc*
25 Handle (insulated gripping surface)
*Accessories shown or described are not part of the standard de-
livery scope of the product. A complete overview of accessories
can be found in our accessories program.
GWS ... 24-230 24-230
Professional VX JVX
3 601 ... H64 S.. H64 Z..
H64 5..
W 2400 2400
W 1600 1600
-1
min 6500 6500
mm 230 230
M 14 M 14
mm 18 18
–
–
kg 6.5 6.5
/II /II
English | 19
*
24-230 26-180 26-230
JVX JBV BV
H64 U.. H55 U.. H56 S..
2400 2600 2600
1600 1700 1700
6500 8500 6500
230 180 230
M 14 M 14 M 14
18 25 25
– –
–
– –
6.6 6.2 6.4
/II /II /II
1 619 929 J27 | (15.9.11)
26-230
JBV
H56 U..
2600
1700
6500
230
M 14
25
–
6.4
/II