Page 1
GWS 21-180 GWS 21-230 GWS 24-180 GWS 24-230 GWS 26-180 GWS 26-230 PROFESSIONAL Manual de instruções Manual de instrucciones Operating instructions Atenção! Leia antes de usar. ¡Atención! Lea antes de usar. Attention! Read before using.
! The rated speed of the accessory must be at least equal to the maximum speed marked on the power tool. Accessories running The Angle Grinders from BOSCH have been developed to perform faster than their rated speed can fly apart.
Page 4
! Do not “jam” the cut-off wheel or apply excessive pressure. Do off. not attempt to make An excessive depth of cut. Overstressing ! BOSCH can assure flawless functioning of the machine only the wheel increases the loading and susceptibility to twisting or when original accessories are used.
Roughing and cutting discs become very hot while cutting-off operation. As showed in the picture working; do not touch before they have cooled. BOSCH will not below: liable for problems arising from inadequate use or from the assembly...
Adjustment of the transmission housing statutory/country-specific regulations (proof of purchase by invoice or delivery note). Only to GWS 21-180 / 21-230 / 24-180 / 24-230. Damage attributable to normal wear and tear, overload or improper In order to make the handling still easer, the handling will be excluded from the guarantee.
General power tool safety instructions WARNING! Read all safety warnings and all d) Remove any adjusting key or wrench before switching on instructions. Failure to follow the warnings and instructions may the power tool. A wrench or a key left attached to a rotating part result in electric shock, fire and/or serious injury.