Summary of Contents for Bosch GWS Professional 20-230 H
Page 1
GWS Professional 20-230 H | 22-180 H | 22-230 H | 22-230 JH | 24-180 H | 24-230 H | 24-230 JH | 24-230 JVX | 26-180 H | 26-230 B | 26-230 H en Original instructions Notice originale Orijinal işletme talimatı ru Оригинальное...
A moment of inatten- accordance with these instructions, taking into ac- tion while operating power tools may result in serious per- count the working conditions and the work to be per- sonal injury. 1 609 92A 5GH | (13.02.2020) Bosch Power Tools...
Page 7
Always use auxiliary handle, if provided, for ping small abrasive or workpiece fragments. The eye maximum control over kickback or torque reaction protection must be capable of stopping flying debris gen- Bosch Power Tools 1 609 92A 5GH | (13.02.2020)
Page 8
When the wheel, at the point of opera- when the power supply is interrupted, e. g., in case of tion, is moving away from your body, the possible kick- 1 609 92A 5GH | (13.02.2020) Bosch Power Tools...
Always use the protective guard for cutting (13)/(29) Fitting protective equipment when cutting bonded abrasives. Pull the plug out of the socket before carrying out any Provide sufficient dust extraction when cutting stone. work on the power tool. Bosch Power Tools 1 609 92A 5GH | (13.02.2020)
Page 12
Always fit the hand guard (15) when working with the rubber sanding pad (17). See the graphics page for fitting instructions. Before fitting the rubber sanding pad (17), place the two spacer discs (16) on the grinding spindle (4). 1 609 92A 5GH | (13.02.2020) Bosch Power Tools...
(chromate, wood preservative). Materials contain- ing asbestos may only be machined by specialists. – Use a dust extraction system that is suitable for the ma- terial wherever possible. Bosch Power Tools 1 609 92A 5GH | (13.02.2020)
Rough grinding Never use cutting discs for rough grinding. (GWS 24-230 JVX) The power tool is fitted with the Bosch Brake The best rough grinding results are achieved with a set angle System, a patented electromechanical run-out of 30° to 40°. Move the power tool back and forth with mod- brake.
In order to avoid safety hazards, if the power supply cord tubing, start at the smallest needs to be replaced, this must be done by Bosch or by an cross section. after-sales service centre that is authorised to repair Bosch Cutting stone power tools.
18 | Français At www.bosch-pt.co.uk you can order spare parts or arrange Do not dispose of power tools along with the collection of a product in need of servicing or repair. household waste. Tel. Service: (0344) 7360109 E-Mail: boschservicecentre@bosch.com Only for EU countries:...
Page 17
Robert Bosch Power Tools GmbH 70538 Stuttgart GERMANY www.bosch-pt.com 1 609 92A 5GH (2020.02) O / 105 1 609 92A 5GH...