Honeywell lynx touch User Manual page 49

Editing a Scheduled Function
Deleting a Scheduled Function
9. If Auto Stay is selected, select "Clear" then
enter a 4-digit time on the displayed keypad
then select "Save". If "Rules" is selected
proceed to Step 11. If "Disarm Notification"
is selected proceed to Step 12.
10. Select "Rules" then select a Rule from the
displayed list (Rules 1 through Rules 20).
11. Enter a Start Time and End Time on the
displayed keypad then select "Save".
12. Select the " " button. The system returns to
the Automation programming screen.
1. At the Schedules
Schedule you wish to edit.
Note: Rules 21-40 are only accessible through
TotalConnect Service.
2. Select the "Edit" button. The Schedule
programming screen will appear. Follow the
steps as noted above in the programming a
Scheduled Function section to edit and
save your changes.
1. At the Schedules
Schedule you wish to delete.
Note: Rules 21-40 are only accessible through
TotalConnect Service.
2. Select the "Delete" button. A confirmation
screen will be displayed. Select "Yes" to
confirm the deletion.
3. Select the " " button. The system returns
to the Automation programming screen.
– 49 –
USER FUNCTIONS USER FUNCTIONS
USER FUNCTIONS USER FUNCTIONS
Automation
screen, select
screen, select
the
the