Honeywell lynx touch User Manual page 31

Activating a Panic Alarm
SECURING THE PREMISES SECURING THE PREMISES
SECURING THE PREMISES SECURING THE PREMISES
1. With the system in the disarmed or armed
state, depress and hold the "Panic" key until
the system displays the Panic screen
(approximately 3-4 seconds).
2. Touch the desired panic icon on the screen.
3. If applicable, the alarm sounds and the
associated icon is displayed.
Note: Dependant upon how your system has
been programmed a keypad may be
displayed. This will allow you to cancel
the alarm by entering valid User Code
on the keypad.
– 31 –
Panic Keys