Honeywell lynx touch User Manual page 59

Manually Configure Access Point
1. At the Master User screen select the WiFi
Config icon. The system displays the WiFi
options screen.
2. Select the "Manually Configure AP" button to
view the available networks. The WiFi
enrollment screen is displayed.
3. Select the "SSID Name" button and enter
Network name on the displayed keypad.
4. Select the "Security" button and select from
"Open", "WPA1, "WPA2" and "WEP". The
network information is displayed. If a
password is required, select the "Key" button
and enter the password.
Note: When configuring for WEP encryption key on the
access point, always use hexa-decimal type as
the input method on the panel. The input key
should contain characters such as 0-9 and A-F.
4. Select the "Join" button. A confirmation screen
will be displayed. Select "OK", then select
"Save" to confirm the selection.
5. Select the " " button as required to return to
the Master User screen.
– 59 –
USER FUNCTIONS USER FUNCTIONS
USER FUNCTIONS USER FUNCTIONS
WiFi Configuration