Honeywell lynx touch User Manual page 20

SECURING THE PREMISES SECURING THE PREMISES
SECURING THE PREMISES SECURING THE PREMISES
Arming the System
If an invalid User Code is entered, the system will return to the home screen.
Auto Stay Feature
NOTE: If the exit route entry/exit sensor is in a check condition or has been bypassed it will result in a loss of interior
protection because the alarm system will arm STAY in this case. Consult with your installer for servicing of the
entry exit zones or to turn off this feature if a check condition on entry exit zones occurs.
3. At the end of the exit delay the system
announces "Armed Stay" and displays
the "Armed Stay" screen.
– 20 –