Honeywell lynx touch User Manual page 50

USER FUNCTIONS USER FUNCTIONS
USER FUNCTIONS USER FUNCTIONS
Automation
Rules
The following options are programmed in this section:
Programming Field
Rule 1 - 20:
Name:
Type:
Action:
Start Zone Type:
Stop Zone Type:
Start System Operation:
Stop System Operation:
Zone Number Operation:
Programming Rules
Select Rule 1 -20
Note: Rules 21-40 are only accessible through TotalConnect Service.
Name the device
Select the output type
Select the action required for the device
Select Zone Type to start event
Select Zone Type to stop event
Select System Operation to start event
Select System Operation to stop event
Select Zone Number to trigger event upon fault, trouble or alarm as selected.
– 50 –
Action
1. With the system in the disarmed state,
select the "Automation" icon from the
Home Screen. The system displays the
Keypad screen.
2. Select the "Rules" button. The system
displays the Rules screen.