i3 International i3-B731 Quick Start Manual

Waterproof IR D/N Bullet Camera

• Power Supply

Ensure the supplied voltage meets the power consumption requirements of this
camera before powering the camera on. Incorrect voltage may cause irreparable
damage to the video camera and will effectively void the camera warranty.
• Cleaning
- For maximum optical clarity, the camera dome or lens must remain clean. Use a
soft, dry cloth to remove finger prints or dust from the dome cover.
- Use a blower to remove dust from the lens.
- Clean the body with a soft, dry cloth. If it is very dirty, use a cloth dampened with a
small quantity of neutral detergent, then wipe dry.
- Do not use volatile solvents such as alcohol, benzene, or thinners, as they may
damage the surface finishes.
• Servicing
- To avoid electrical shock and to preserve the product warranty, DO NOT
disassemble the camera. Refer servicing to qualified personnel only.

• Package Contents

- IR Bullet Camera x1
- Printed Quick Start Guide x1
- CD-ROM (User Manual) x1
- Guide Pattern Sticker (Mounting Template) x1
- TP4-25L screw x3
- 1/4" x 1 3/8" plastic anchor x3

• Camera Parts

Quick Start Guide

• Camera Installation

Step 1. Mounting the camera
1. Place the "Guide Pattern Sticker" included with your purchase on the desired location.
2. Drill three holes on the installation surface and insert provided anchors into the pre-
drilled holes.
3. Install the bracket base onto the installation surface and fasten securely using the
provided screws.
Step 2. Connecting the cables
Connect the camera's power/video cable to external power and monitor.
i3-B731