Cuckoo CRP-HL10 Fuzzy Series Operating Instructions Manual page 33

If there is a problem with your cooker, check the following details before requesting service to your dealer. Sometimes
the cooker may not operate as desired if used incorrectly.
Case
When the button cannot
operate with " "
When the Pressure
"Cook/Turbo" Timer
button are not operate
with " "
When the rice is badly sticky.
When " " is showed
on the LCD
When the time cannot be
preset.
When you smell after and
before cooking?
When the top cover cannot be
closed.
When " ", " " are
showned on the LCD by turns.
When " ", " " are
showned on the LCD by turns.
Check points
Is there inner pot?
Check the rated voltage?
Did you turn the Lock/Unlock Handle
to "Lock"
Is "pressure" lamp on?
Is there any rice or any other alien
substance on the temperature sensor or
the bottom surface of the inner pot?
Cheek the rated Voitage?
Is the current time correct?
Is it right AM or PM?
Did you set the reservation time over
13 hours?
Did you clean it after cooking?
Is the inner pot correctly put in the main
body?
Is the Lock/Unlock handle on the top cover
set to "Lock"?
Is there hot thing in the inner pot?
When mycom power is broken.
When the sensor is broken.
CHECK BEFORE ASKING
FOR SERVICE
Do the following
Please insert inner pot.
120V only.
Please turn the Lock/Unlock Handle to " Lock".
Clean all the alien substance on the temperature
sensor or the bottom surface of the inner pot.
Cut the power and contact customer service.
It is normal to get "
water.
This is only for 120V.
Set the current time. (Refer to page 14)
Check the AM, PM.
Maximum reservation time is 13 hours. (Refer to
page 25~26)
Please clean it after cooking.
Please put in the inner pot perfectly.
The Lock/Unlock handle to "Unlock".
Pull the pressure weight to aside once.
Please cut the power and contact customer service.
Please cut the power and contact customer service.
" when putting only