Table of Contents
Advertisement
Replacing parking light
8
bulb
Make sure ground is level and
102
firm and place Maxi-Scooter on
its center stand.
Switch off ignition.
To replace the right-hand light
source for the side light, re-
move the right-hand fairing
side panel.
To replace the left-hand light
source for the side light, re-
move the left-hand fairing side
z
panel.
Disconnect plug connection
of bulb to be replaced and
remove socket 1 by turning
counterclockwise.
Remove bulb 2 from the
socket.
Replace defective light source.
Bulb for parking light
W5W / 12 V / 5 W
To protect glass on new bulb
against contamination, always
use a clean, dry cloth to hold it;
do not touch with bare fingers.
Insert bulb 2 in bulb socket.
Install the socket 1 by turning
it clockwise and connect the
connector.
Install fairing side panel
(
111).
Advertisement
Table of Contents
