Piston And Connecting Rod Assembly - Westerbeke 26 G Technical Manual

Piston and Connecting Rod Assembly
1. Assemble the pistons and connecting rods so that
the front mark tocated at the side of the connecting
rod and the front mark provided on the top of the pis-
ton come on the same side.
2. Using the special service tool # 09221-25014 (Main
body) and 09221-87702. attach the fitting piece (2)
onto the stand (1). and place the long bar (4) into
position.
3. Place the small bar (5) into the piston pin. Then press
the piston pin into position using a press.
NOTE: After the connecting rod has been as-
sembled in the piston. ensure that the piston can
move lightly back and forth.
115
Front mark
Westerbeke Engines