Settings Of The Normal Menu; Operating Mode Setting; Unit Of Measurement Setting - Vimar 02905 Installer Manual

9. Settings of the normal menu

From the settings menu you can configure all the features of the thermostat.
On the main screen (see Fig. 3) tap the
From the main menu, using
provide access to the corresponding submenus:
1.
2.

unit of measurement setting

3. and air-conditioning/heating setting
4. temperature setpoint setting
5. calibration setting
6. and multi-function input setting
7. OnOff/PID temperature control algorithm setting
8. device info
9. lock/unlock PIN setting
Touching opens the submenu and then the flashing highlights the parameters of the submenu.

9.1 Operating mode setting

This menu is used to select the operating mode of the device:
• Manual
• Off
• Antifreeze (only if the thermostat is set on "heating")
Using and
9.2 Unit of measurement setting
• The menu lets you set the unit of measurement used for the temperature (°C or °F)
Using and
16
icon.
and will display the following (flashing) symbols in succession, which
operating mode setting
select the required mode and confirm with
select the required unit of measurement and confirm with
.
.