Configuring System Warnings - Lorex LNR100 Instruction Manual

14 Using the Main Menu
• Read/Write: Normal recording hard drive.
• Read only: Do not record on the hard drive.
To select hard drive types:
1. From the Main Menu, click
2. Under Set to, select the hard drive type.
3. Click Apply.
4. Click OK to save changes. The system will restart.

14.2.5 Configuring System Warnings

The Warning menu allows you to configure actions taken when system errors occur.
To configure system error actions:
1. From the Main Menu, click
2. Under Event Type, select one of the following system errors to configure: No Disk,
Disk Error, Disk No Space, Net Disconnection, IP Conflicted, or MAC Conflicted.
3. Check Enable to enable warnings for the selected Event Type.
4. Configure the following actions that will be taken when errors occur:
• Show Message: Check to show pop-up window with information related to the
error.
• Alarm Upload: Upload events to FLIR Cloud™ Client.
• Send Email: Check to enable email message. You must configure email alerts be-
fore you will be able to receive them.
• Buzzer: Check to enable system buzzer.
5. Click Save to save changes.
#; r. 2.0/23308/23308; en-US
>HDD Management.
>Warning.
56