20
Connecting a PTZ Camera (LNR100 Series)
2. Select Tour.
3. Under Patrol No., select the tour you would like to configure.
4. Under Preset, select a preset you would like to add to the tour.
5. Click Add Preset.
6. Repeat steps 4 and 5 to add additional presets to the tour.
NOTE
Click Del Tour to clear all presets from a tour.
To run a tour:
1. Press Page Switch to get to the call action page.
2. Under No., select the number of the tour you would like to run and click Tour.
3. Click Stop to stop the tour.
20.2.3 Pattern
Patterns automatically cycle the camera between two positions.
To create a pattern:
1. Move the camera to the desired start position.
164
#; r. 2.0/23308/23308; en-US