Controlling The Camera's Menu - Lorex LNR100 Instruction Manual

20 Connecting a PTZ Camera (LNR100 Series)
To set up an auto scan:
1. Move the camera to the desired left position.
2. Click Set to open the action setup menu.
3. Select Border.
4. Click Left to save the camera's current position as the left position in the auto scan.
5. Right click to return to PTZ controls, and move the camera into the desired right
position.
6. Click Set and then click Right to save the camera's current position as the right posi-
tion in the auto scan.
To run auto scan:
1. Press Page Switch to get to the call action page.
2. Click AutoScan.
3. Click Stop to stop auto scan.

20.3 Controlling the Camera's Menu

You can control the camera's OSD menu from the NVR. Please note this might not be sup-
ported on all camera models.
#; r. 2.0/23308/23308; en-US
166