Connecting To The Camera; Password Setting - Samsung SNV-L6013R User Manual

web viewer

ConneCTinG To THe CAmerA

normally, you would
1. Launch the Internet browser.
2. Type the IP address of the camera in the address bar.
ex) • IP address (IPv4) : 192.168.1.100 
http://192.168.1.100
- the Login dialog should appear.
• IP address (IPv6) : 2001:230:abcd: ffff:0000:0000:ffff:1111
 http://[2001:230:abcd:ffff:0000:0000:ffff:1111] - the Login
dialog should appear.
if the HTTp port is other than 80
1. Launch the Internet browser.
2. Type the IP address and HTTP port number of the camera in the address bar.
ex) IP address : 192.168.1.100:HTTP Port number(8080)
 http://192.168.1.100:8080 - the Login dialog should appear.
using urL
1. Launch the Internet browser.
2. Type the DDNS URL of the camera in the address bar.
ex) URL address : http://www.samsungipolis.com/Product ID
- the Login dialog should appear.
Network connection is disabled in the LAN only environment.
`
J
Connecting via upnp
1. Run the client or operating system in support of the UPnP protocol.
2. Click the camera name for search.
In the Windows operating system, click the camera name searched from the network menu.
- The login window is displayed.
20_ web viewer
Connecting via Bonjour
1. Run the client or operating system in support of the Bonjour protocol.
2. Click the camera name for search.
In the Mac operating system, click the camera name searched from the Bonjour tab of Safari.
- The login window is displayed.
To check the DDnS address
If the camera is connected directly to the DHCP cable modem, DSL modem, or PPPoE modem, the IP
address of your network will be changed each time you try to connect to the ISP (Internet Service Provider)
server.
If this is the case, you will not be informed of the IP address changed by DDNS.
Once you register a dynamic IP-based device with the DDNS server, you can easily check the changed IP
when you try to access the device.
To register your device to the <DDnS> server, visit www.samsungipolis.com and register your device first,
and then set the Web Viewer's <network> - <DDnS> to <Samsung DDnS>, as well as providing <product
iD> that had been used for DDNS registration.

pASSworD SeTTinG

When you access the product for the first time, you must register the
login password.
When the "password change" window appears, enter the new
password.
For a new password with 8 to 9 digits, you must use at least 3 of
`
J
the following: uppercase/lowercase letters, numbers and special
characters. For a password with 10 to 15 digits, you must use at
least 2 types of those mentioned.
- Special characters that are allowed. : ~`!@#$%^*()_-+=|{}[].?/
For higher security, you are not recommended to repeat the same characters or consecutive keyboard inputs for your
`
passwords.
If you lost your password, you can press the [RESET] button to initialize the product. So, don't lose your password by using a
`
memo pad or memorizing it.