Toyota 2016 Camry Hybrid Owner's Manual page 488

488
8-2. Steps to take in an emergency
Starting the hybrid system
1
Ensure that the shift lever is in P and firmly depress the brake
pedal.
2
Touch the Toyota emblem side
of the electronic key to the
power switch.
When the
detected, a buzzer sounds and the
power switch will turn to ON mode.
When the smart key system is
deactivated in customization set-
ting, the power switch will turn to
ACCESSORY mode.
3
Firmly depress the brake pedal and check that
on the multi-information display.
4
Press the power switch.
In the event that the power switch still cannot be started, contact your
Toyota dealer.
Stopping the hybrid system
n
Shift the shift lever to P and press the power switch as you normally do when
stopping the hybrid system.
n Replacing the key battery
As the above procedure is a temporary measure, it is recommended that the
electronic key battery be replaced immediately when the battery is depleted.
(P. 425)
Changing power switch modes
n
Release the brake pedal and press the power switch in step
The hybrid system does not start and modes will be changed each time the
switch is pressed. (P. 162)
n When the electronic key does not work properly
Make sure that the smart key system has not been deactivated in the cus-
l
tomization setting. If it is off, turn the function on.
(Customizable features P. 529)
Check if battery-saving mode is set. If it is set, cancel the function.
l
(P. 123)
CAMRY_HV_U (OM33C35U)
electronic key is
I n f o r ma t i o n P r o v i d e d b y :
is displayed
3 above.