Toyota 2016 Camry Hybrid Owner's Manual page 429

Hide thumbs Also See for 2016 Camry Hybrid:

Table of Contents

After a fuse is replaced

If the lights do not turn on even after the fuse has been replaced, a bulb may

need replacement. (P. 430)

If the replaced fuse blows again, have the vehicle inspected by your Toyota

If there is an overload in a circuit

The fuses are designed to blow, protecting the wiring harness from damage.

When replacing light bulbs

Toyota recommends that you use genuine Toyota products designed for this

vehicle. Because certain bulbs are connected to circuits designed to prevent

overload, non-genuine parts or parts not designed for this vehicle may be

To prevent system breakdowns and vehicle fire

Observe the following precautions.

Failure to do so may cause damage to the vehicle, and possibly a fire or

Never use a fuse of a higher amperage rating than that indicated, or use

any other object in place of a fuse.

Always use a genuine Toyota fuse or equivalent.

Never replace a fuse with a wire, even as a temporary fix.

Do not modify the fuses or fuse boxes.

Before replacing fuses

Have the cause of electrical overload determined and repaired by your

Toyota dealer as soon as possible.

CAMRY_HV_U (OM33C35U)

7-3. Do-it-yourself maintenance

I n f o r ma t i o n P r o v i d e d b y :

Troubleshooting