Toyota 2016 Camry Hybrid Owner's Manual page 233

WARNING
Handling the radar sensor
n
One Blind Spot Monitor sensor is installed inside the left and right side of
the vehicle rear bumper respectively. Observe the following to ensure the
Blind Spot Monitor can function correctly.
Keep the sensor and its surrounding
l
area on the bumper clean at all times.
Do not subject the sensor or surrounding area on the bumper to a strong
l
impact. If the sensor moves even slightly off position, the system may mal-
function and vehicles that enter the detection area may not be detected. If
the sensor or surrounding area is subject to a strong impact, always have
the area inspected by your Toyota dealer.
l Do not disassemble the sensor.
Do not attach accessories or stickers to the sensor or surrounding area on
l
the bumper.
l Do not modify the sensor or surrounding area on the bumper.
l Do not paint the sensor or surrounding area on the bumper.
CAMRY_HV_U (OM33C35U)
4-5. Using the driving support systems
I n f o r ma t i o n P r o v i d e d b y :
233
4