Toyota 2016 Camry Hybrid Owner's Manual page 410

410
7-3. Do-it-yourself maintenance
How to initialize the tire pressure warning system
n
1
Park the vehicle in a safe place and turn the power switch off.
Initialization cannot be performed while the vehicle is moving.
2
Adjust the tire inflation pressure to the specified cold tire inflation
pressure level. (P. 511)
Make sure to adjust the tire pressure to the specified cold tire infla-
tion pressure level. The tire pressure warning system will operate
based on this pressure level.
3
Turn the power switch to ON mode.
4
Press and hold the tire pres-
sure warning reset switch
until the tire pressure warn-
ing light blinks slowly 3 times.
"- -" will be displayed for infla-
tion pressure of each tire on
the multi-information display
while the tire pressure warning
system determines the posi-
tion of each tire.
When position of each tire is
determined, the inflation pres-
sure of each tire will be dis-
played on the multi-information
display.
5
Drive the vehicle at approximately 25 mph (40 km/h) or more for
approximately 10 minutes.
When initialization is complete, the inflation pressure of each tire will
be displayed on the multi-information display.
Initialization will take longer than approximately 10 minutes if the
vehicle is stopped for a long time, such as at traffic signals.
u
Registering ID codes
The tire pressure warning valve and transmitter is equipped with a
unique ID code. When replacing a tire pressure warning valve and
transmitter, it is necessary to register the ID code. Have the ID code
registered by your Toyota dealer.
CAMRY_HV_U (OM33C35U)
I n f o r ma t i o n P r o v i d e d b y :