Advertisement
_____________________________________________________________________________
6. Now, collapse the antenna sections. Hold the base tube firmly in one hand
and grab and twist the section above the base tube while pushing it toward
the base tube until the tube collapses into the base tube.
7. Before collapsing any other sections, pull the vertical element wire out of the
bottom of the base tube.
8. Thread the wire through the small hole in the end cap center piece and then
screw the bottom end cap back onto the base tube.
9. Stay at the base tube and collapse the remaining antenna sections one-by-
one by twisting and pushing them into the base tube.
NOTE: Be sure to keep an eye on the vertical element wire to ensure
that it does not get caught in any of the collapsing sections.
10. When all of the sections are in the base tube, push the rubber end cap
into the top of the base tube.
11. Use the provided Velcro
base tube and you're ready to go!
MAINTENANCE
The S9v features an enhanced, durable painted surface. If you notice surface
oxidation (color becomes lighter), use a soft cloth and Armor All
finish. Automotive spray wax is also an excellent product to seal and protect the
finish. The S9v may also be repainted, if desired, using a quality exterior spray
paint such as Krylon
finish and then prime it with a quality primer before you paint it.
________________________________________________________________________
TM
strap to secure the vertical element wire to the
TM
TM
or Rustoleum
. It is suggested that you lightly dull the
26
S9v 31' M K II Installation Guide
TM
to restore the
Advertisement
