Advertisement
_____________________________________________________________________________
k. Before we raise the antenna, unscrew the bottom end cap. This cap
consists of a center piece and plastic ring. Remove the center piece and
put it in your pocket. Now screw the ring back onto the bottom of the base
tube. The ring will protect the base tube bottom cap threads while the
antenna is deployed and it also creates a drain path for any moisture that
accumulates inside the fiberglass sections.
2. Screw plastic ring back
onto the base tube
5. Raise the S9v. This is the fun part! To raise the S9v, simply grab the base
tube with one hand and the next section with your other hand and raise the
antenna. Next, center the antenna directly over the pipe or Portable Mount
and then gently lower the S9v down until the bottom of the base tube rests on
the ground or the optional pipe mount clamp.
________________________________________________________________________
S9v 31' M K II Installation Guide
1. Remove cap center piece
20
Advertisement
