Faqs - Toshiba e-STUDIO 207L Quick Start Manual

Hide thumbs Also See for e-STUDIO 207L:
Table of Contents

Advertisement

Chapter 4 TROUBLESHOOTING

FAQs

This section introduces FAQs from our customers. If you have a problem, please read this section first.
About copying
Can I copy originals in different sizes in one go?
Yes. By using the Reversing Automatic Document
Feeder, you can copy more than one original in
different sizes such as A4 or B4 in one go.
Original sizes that can be copied in one go are as
follows:
North America: LD, LG, LT, LT-R, COMP
Other than North America: A3, A4, A4-R, B4, B5,
FOLIO
1. Place paper in the drawer. If you want to copy on
paper of the same size as the originals, place
paper of the corresponding size in the different
drawers.
2. Adjust the side guides to the widest original. Then
place the originals aligning them against the
guide on the front side.
3. Press [ZOOM] on the touch panel.
4. Press [MIXED SIZE] on the touch panel.
5. If you want to copy all the originals on paper in
the same size, press [AMS].
6. Press [OK] on the touch panel to return the menu
to the basic menu for the copying functions.
7. <To copy all on paper of the same size>
Press an icon on the touch panel that indicates the
drawer in which paper of the desired size is
placed.
<To copy on paper of the same size as the
original>
Press [APS] on the touch panel.
8. Press the [START] button on the control panel to
start copying.
& Copying Guide (PDF): "Chapter 3: BASIC COPY
MODES" - "Paper Selection", "Copying mixed-size
originals in one operation"
52
B4
A4-R
Can I copy an A5 original with the Reversing
Automatic Document Feeder?
Yes. Place an A5 original on the Reversing Automatic
Document Feeder in a landscape direction.
A5-R
For how to place originals on the Reversing
Automatic Document Feeder or the available types
and sizes of originals refer to the following guide:
& Copying Guide (PDF): "Chapter 2: HOW TO MAKE
COPIES" - "Placing Originals", "Using the RADF
(Reversing Automatic Document Feeder)"
Black streaks appear on the copied image.
If the scanning area, meaning the surface of the long
rectangular glass, is dirty, black streaks may appear
on the copied image or faxes made with the
Reversing Automatic Document Feeder.
In this case, clean the scanning area. For how to clean
it, see the following page or refer to the following
guide:
ABC
& P.44 "Regular Cleaning" in this manual
& Troubleshooting Guide (PDF): "Chapter 2:
TROUBLESHOOTING FOR COPYING" - "Copying
Problems"
A5

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents