ThinkPad E460 User Manual page 76

Table 2. Config menu items (continued)
Menu item
Keyboard/Mouse
Display
60
User Guide
Submenu item
Fn and Ctrl Key swap
F1–F12 as primary function
Fn Sticky key
Boot Display Device
Total Graphics Memory
Selection
• Disabled
• Enabled
• Disabled
• Enabled
• Disabled
• Enabled
• ThinkPad LCD
• Analog (VGA)
• HDMI
• Display on Dock
• 256 MB
• 512 MB
Comments
Enable exchanges of Fn
and Ctrl key action at the
bottom-left of the keyboard.
Disabled: Fn key and Ctrl
key behavior is as printed
on the keyboard.
Enabled: Fn key works as
Ctrl key. Ctrl key works as
Fn key.
Enable the F1-F12 function
or the special function
printed as an icon on each
key as the primary function.
Enabled: Executes the
F1-F12 function.
Disabled: Executes the
special function.
To temporarily switch the
above two options, press
Fn+Esc to enable FnLock.
The FnLock indicator is on
when FnLock is enabled.
When the option is enabled,
you can press the Fn key
to keep it in a pressed
condition; then press the
desired function key. The
action is equivalent to
pressing the required key
simultaneously with the Fn
key. When you press the
Fn key twice, the state is
locked until you press the
Fn key again.
Select the display device
that is to be activated at
boot time. This selection
is effective for boot time,
password prompt, and
ThinkPad Setup.
Allocate total memory
which Intel® internal
graphics device shares.
Notes:
• If you select 512 MB,
the maximum usable
memory may be reduced
on the 32-bit operating
system.