First Steps; Unpacking; Unfastening Locking Screws; Cable-Free Connection - Omnitronic ACS-510 User Manual

4

FIRST STEPS

Unpacking

Remove the ACS-510 from the carton. The
system consists of a subwoofer and two satellite
speakers. Delivery includes the power cable and
two speaker cables. You will find the stands and
the adapter plates in a separate carton.

Unfastening Locking Screws

Locking screws secure the satellite speakers to
the subwoofer cabinet to protect them during
transport. Loosen the two locking screws and
remove the satellites from the subwoofer cabinet.

Cable-free Connection

All speakers are furnished with a smart click
mechanism that enables a mechanical and
electrical connection.

Mono Setup

For mono mode, combine the satellite speakers
and directly attach them onto the subwoofer
cabinet. This will establish the electrical
connection and require no further cabling. Set the
SETUP selector switch [9] to position
Alternatively, you can use a tube of the supplied
stands and insert it into the flange on the upppder
side of the subwoofer. Then place an adapter
plate onto the tube and secure the pair of
satellites on the adapter by engaging the click
mechanism. Connect the pair of satellites to the
the jack SPEAKER OUT L [15] using one of the
included speaker cables.

Stereo Setup

For stereo mode, mount the satellite speakers on
to the stands included. For this, place the adapter
plates onto the stands and secure the satellites on
the adapters by engaging the click mechanism.
Connect the left speaker to the SPEAKER OUT L
jack [15] and the right speaker to the SPEAKER
OUT R jack [20] using the included speaker
cables. Set the SETUP selector switch [9] to
position .
17
.