Snooze/Dimmer Operation - iHome iHM46 Instruction Manual

Programming Snooze Time
The default snooze time is 9 minutes. You can adjust the snooze duration. During
normal operation (when alarm is NOT sounding), press and hold the Snooze/Dimmer
Button for 2 seconds until the ZZZ indicator, Snooze time and MIN display flash. A
beep will sound. Adjust the duration of snooze time up or down (between 1 - 29
minutes) by pressing the - or + Buttons. Press the Snooze/Dimmer Button to confirm.
You should hear 2 beeps indicating the Snooze time is set.
Using the Snooze/Dimmer Button
1. Press the Snooze/Dimmer Button after the alarm sounds. The alarm will be silenced
and will come on again after the set snooze duration. You may repeat this cycle sever-
al times during the one hour alarm cycle.
2. During normal operation with the AC adaptor, press the Snooze/Dimmer Button
repeatedly to adjust the brightness of the LCD display. During portable operation with
4 "AA" batteries, the LCD backlight will display for about 5 seconds when you press
the Snooze/Dimmer Button once.

Snooze/Dimmer Operation

9