Alarm Operation - iHome iHM46 Instruction Manual

This unit features Gentle Waking, which gradually increases the volume of the alarm.
Setting the Alarms
This unit has 2 alarms which can be set to come on at di erent times. Directions below
show setting alarm 1
alarm 2.
1. Press and hold the
sounds.
2. Press the - or + Button until the desired alarm time is displayed (hold for rapid adjust).
Remember to set the correct AM or PM time (PM/AM indicators are to the left of the
time display).
3. Press the Button again to exit the alarm setting mode. You should hear 2 beeps
indicating the alarm is set.
Note: Once you set the alarm time, the alarm will be automatically armed, indicated by
the alarm icon. To disarm the alarm, press the
and the alarm will not sound at the set time.
4. When the alarm is sounding, the
• To snooze during the alarm, press the Snooze/Dimmer Button. The alarm will be
silenced for 9 minutes (or for a programmed snooze duration, see page 9) then
come on again.
• To turn the alarm o and reset it to come on the next day, press the
either alarm button
5. If the alarm is not turned o once it sounds, it will play for one hour then turn o
automatically. This cycle will repeat every 24 hours unless the controls are changed.

Alarm Operation

. Use the same method with the Alarm 2
Button until the current alarm time display flashes and a beep
icon will flash.
Button. The
8
Button to set
icon will disappear
Button or