Moving Events (Move); Transpose - Akai MPC5000 Reference Manual

42 Editing Sequences
05. In the 'Mode' field, specify how to copy the data to the destination.
REPLACE
The MPC5000 will overwrite the destination with the source data. The data that is already in the destination will be removed.
MERGE
The MPC5000 will merge the source data with the data that is already in the destination.
06. In the 'Start' field, set the start point of destination time. The MPC5000 will start the copy to the time set here.
07. In the 'Copies' field, set the number of times to copy.
To copy the same phrase repeatedly, enter the number of copies in the 'Copies' field. You can copy it repeatedly with one operation.
08. Press the [F6] (DO IT) button.
The MPC5000 will start copying the data.

Moving events (MOVE)

You can move events within the selected region to another location. Unlike the copy function, this function will remove
the source data from the original location.
01. Select the 'Edit' field in the EVENT page of the SEQ EDIT mode,
and select MOVE.
The various fields necessary for moving will be displayed.
02. In the 'Range' field and the 'Pads/Notes' field, select the region
that you wish to move.
03. In the 'From Sq' field and the 'Tk' field on the right, select the
source sequence and track.
04. In the 'to Sq' and the 'Tk' field on the right, select the
destination sequences and tracks.
05. In the 'Mode' field, specify how to move the data to the destination.
REPLACE
The MPC5000 will overwrite the destination with the source data. The data that is already in the destination will be removed.
MERGE
The MPC5000 will merge the source data with the data that is already in the destination.
06. In the 'Start' field, set the start point of destination time.
The MPC5000 will start moving the event to the time selected here.
07. Press the [F6] (DO IT) button.
The MPC5000 will start moving the event.

Transpose

You can transpose (change the key of) the note events. This operation changes the selected track, whether it's a DRUM
track or a MIDI track.
01. Select the 'Edit' field in the EVENT page of the SEQ EDIT mode,
and select TRANSPOSE.
The various fields necessary for the transpose will be displayed.
02. In the 'Range' field and the 'Pads/Notes' field, select the region
that you wish to edit.
03. In the 'Edit Sq' field and the 'Tk' field on the right, select the
sequence and track that you wish to edit.
When the MIDI track is selected, the 'Amount' field is displayed. Set the amount of
the transpose in the 'Amount' field. The unit of the amount is semi tone. When the
DRUM track is selected, the 'Pad' field is displayed. You can change the selected pad event to another pad event. To do this, select the pad event
you wish to change in the 'Pad/Notes' field and then select the destination Pad in the 'Pad' field.
04. Press the [F6] (DO IT) button.
The MPC5000 will start processing your changes.