About Input Thru (.Ipt) File; Renaming A File; Deleting A File; Copying Files - Akai MPC5000 Reference Manual

About Input Thru (.IPT) File

If you use "SAVE ENTIRE MEMORY" to save the internal memory data, the Input thru file will be saved with the Project
file. The Input Thru file contains the setting of the Input Thru in the MPC5000. When you load the Project file, the Input
Thru file will be loaded automatically with the Project file. You can also load only the Input Thru file (IPT File) in the
Load page.

Renaming a File

You can change the name of the file in the memory card.
01. Select the desired file with the [CURSOR].
You can move through directories with the left/right [CURSOR] buttons.
02. Press and hold the [F5] (EDIT) button.
The Function buttons will change as shown.
03. While holding in the [F5] (EDIT) button, press the [F3]
(RENAME) button.
The NAME EDIT window will be displayed.
04. Enter the new name and press the [F5] (ENTER) button.
For more information about setting the name, see the 'Setting Names' section on
page 20.
Note: If you change the file name, the MPC5000 may not be able to load the file properly. For example, the samples
used for a program are saved in the program file as the sample name. If you change the name of the sample file, the
MPC5000 cannot find it when loading the program.

Deleting a File

To delete the files on the hard drive or memory card, do the following.
01. Press [F2](SAVE) to open the SAVE page.
02. Select the desired file with the cursor.
You can move through the directories with left/right cursor buttons.
03. Press and hold the [F5] (EDIT) button.
The Function buttons will change as shown.
04. While holding in the [F5] (EDIT) button, press [F2] (DELETE).
The selected file will be deleted.
Note: You can select a folder and delete it. If you delete a folder, all the files in that folder will be deleted.

Copying Files

To copy files from one folder to another, or from one drive to another, do
the following:
01. Press [F2](SAVE) to open the SAVE page.
02. Select the desired file or folder to move with the cursor.
You can move through the directories with left/right cursor buttons.
03. Press and hold the [F5] (EDIT) button.
The Function buttons will change as shown.
04. While holding in the [F5] (EDIT) button, press [F1] (COPY).
05. This will copy the selected file and open the COPY TO... window.
06. In the Directory List, select the directory to paste the file to.
07. Press [F5] (PASTE).
The selected file will be copied to the selected location.
169