Changing A Track Name; Changing The Default Name For A Track; Copying A Track; Deleting A Track - Akai MPC5000 Reference Manual

Changing a Track Name

01. In the 'Track' field in the MAIN page, select a track you wish to
change the name on.
02. Press the [WINDOW] button.
The TRACK NAME window will be displayed as shown.
03. In the 'Track Name' field, enter the new name.
For more information for setting the name, see the 'Setting the name' section on
Page 20.
04. Press [F4] (CLOSE) button.
This closes the window and goes back to the MAIN page.

Changing the Default Name for a Track

Usually, when you create a new track, the name will be automatically set as default 'Track##' (## indicates track
number). You can change the default track name.
01. In the MAIN page, select the 'Track' field.
02. Press the [WINDOW] button.
The TRACK NAME window will be displayed as shown.
03. In the 'Default Name' field, enter the new name.
For more information about setting the name, see the 'Setting the name' section on
Page 20.
04. Press [F4] (CLOSE).
This closes the window and goes back to the MAIN page.

Copying a Track

You can copy a track to another track.
01. In the 'Track' field of the MAIN mode, select a track to copy.
02. Press the [WINDOW] button.
The TRACK NAME window will be displayed.
03. Press [F5] (COPY) button.
The COPY TRACK window will be displayed as shown.
04. In the 'Track' field (below), select a track to copy to.
05. Press [F5] (DO IT) button.
Copying the sequence will start. To cancel the operation, press [F4] (CANCEL).

Deleting a Track

You can remove a track from the memory of the MPC5000.
01. In the 'Track' field in MAIN mode, select a track to delete.
02. Press the [WINDOW] button.
The TRACK NAME window will be displayed.
03. Press [F2] (DELETE).
The DELETE TRACK window will be displayed as shown.
04. Press [F5] (DO IT).
That deletes the selected track and changes its name to 'unused'.

Deleting all Tracks

You can delete all the track data in the memory at one time.
05. In the MAIN mode, select the 'Track' field and press the
[WINDOW] button.
The TRACK NAME window will be displayed.
35