Firecom 4100 Operation Manual page 9

Step 6. System Test
Headset users should take turns speaking and listening as a group to make sure communication is open between
all participants. If one or more participants can not be heard or hear, adjust volumes, check the mute button, or
refer to the Troubleshooting in this manual.
The alarm circuit and each entrant's alarm should be tested prior to every use. Test the alarm circuit by depressing
the alarm test button on the front panel. Turn the alarm off by pressing the alarm reset button on the front panel.
Next, each entrant should test their individual alarm buttons located on each headset, one at a time. Both the
audible alarm and entrant's alarm indicator light should activate. This should be confirmed by the attendant. Turn
off the alarm by pressing the alarm reset button and repeat the procedure for each entrant.
Note: The accessory and attendant ports do not have alarm function capabilities.
8
OPERATION AND SYSTEM TEST
Entrant Team Alarm Light
(4) Places
ON
Alarm Test Button
Alarm Reset Button