Meyer Sound M3D Operating Instructions Manual page 22

LD-1A
Figure 26.
Figure 27 shows an LD-2 line driver configured to
produce the same results as the LD-1A line driver shown
MID-BASS & Sub
Crossover (IN)
LD-2
ALL POLARITY SETTINGS FOR
LD-2 & LOUDSPEAKERS
REMAIN THE SAME
Figure 27.
16 • M3D™ Line Array
ALL POLARITY SETTINGS FOR
LD-1A & LOUDSPEAKERS
REMAIN THE SAME
DS-2 & Sub Crossover (IN)
DS-2 OUTPUT
MID-HI OUTPUT (LOW CUT OUT, ARRAY EQ OUT)
M3D and M3D-Sub headroom optimization using an LD-1A line driver
MID-BASS OUTPUT
MID-HI OUTPUT (LOW CUT OUT, ARRAY EQ OUT)
M3D and M3D-Sub headroom optimization using an LD-2 line driver
in Figure 26. The comparison plot when using these
configurations is shown Figure 28.
M3D
M3D-Sub
M3D-Sub
Meyer Sound Laboratories Inc
M3D