Contents Symbols Used Declaration of Conformity According to ISO/IEC Guide and EN 45014...
Page 3
Using the PSW-6 Performance Verification...
Page 4
The Vertical Line Array Two Vertical Line Arrayed PSW-6s @ 60 HZ. Two Vertical Line Arrayed PSW-6s @ 100 HZ. Two Vertical Line Arrayed PSW-6s @ 40 HZ*. Two Vertical Line Arrayed PSW-6s @ 125 HZ.
Page 5
Creating a Quiet Area 2 PSW-6s at 20 meters splayed 90 with a mono singal of equal level.
Page 6
The Horizontal Arch Array Walls and Boundaries Two Horizontally Arrayed PSW-6s @ 40 HZ.
Page 7
Creating Large Horizontal Arrays Two Horizontally Arrayed PSW-6s @ 60 HZ. Two Horizontally Arrayed PSW-6s @ 100 HZ. Two Horizontally Arrayed PSW-6s @ 125 HZ.
Page 8
Full Range System Integration Setting the Crossover Frequency between the MSL-6 and the PSW-6 .
Page 10
1 PSW-6 on the ground 4 PSW-6s on the ground for each MSL-6 in the air. for each MSL-6 in the air.
Page 11
AC Power brownout Intel- ligent AC Current Requirements maximum continuous RMS Voltage Requirements maximum burst RMS Active maximum instantaneous peak current dur- ing burst...